Icom IC-F5062D Instructions
–
4
–
–
1
–
Thank you for choosing the IC-F5062D
vhf
d
pmr
mobile
transceiver
or IC-F6360D
uhf
d
pmr
mobile
transceiver
.
READ ALL INSTRUCTIONS
carefully and
completely before using your transceiver.
INSTRUCTIONS
VHF dPMR MOBILE TRANSCEIVER
Iç-F6062D
UHF dPMR MOBILE TRANSCEIVER
Iç-F5062D
SUPPLIED ACCESSORIES
FOREWORD
A-7217H-1EU
Printed in Japan
© 2015 Icom Inc.
1-1-32 Kamiminami, Hirano-ku, Osaka 547-0003, Japan
OPTIONS
•
RMK-3
separation
kit
+
OPC-609
separation
cable
Allows you to install the transceiver main unit separately
from the front panel for operating convenience.
•
SP-22/SP-30/SP-35/SP-35L
external
speakers
Input impedance : 4
ø
SP-22/SP-35/SP-35L: Rated input; 5 W, Max. input; 7 W
SP-30: Rated input; 20 W, Max. input; 30 W
•
HM-152/HM-152T/HM-148G/HM-148T
hand
microphones
HM-152: Hand microphone
HM-152T: DTMF microphone
HM-148G: Self grounding heavy duty microphone
HM-148T: Self grounding heavy duty microphone with
10-keypad
The 10-keypad of this microphone can be used
for the DTMF code transmission only.
•
SM-26
desktop
microphone
• UT-109R/UT-110R
scrambler
units
Non-rolling type (UT-109R)/Rolling type (UT-110R) voice
scrambler unit provides high communication security.
REAR PANEL CONNECTION
This instruction sheet includes some functions which are
usable only when they are preset by your dealer. Ask your
dealer for details.
See the operating guide for details of the IDAS™
dPMR™ (digital Private Mobile Radio) and the BIIS
(Binary Interchange of Information and Signaling) 1200
system operations. Ask your dealer for details.
Icom, Icom Inc. and Icom logo are registered trademarks of Icom
Incorporated (Japan) in Japan, the United States, the United Kingdom,
Germany, France, Spain, Russia, Australia, New Zealand, and/or other
countries.
IDAS and the IDAS logo are trademark of Icom Incorporated (Japan).
dPMR and the dPMR logo are trademarks of the dPMR MoU Association.
All other products or brands are registered trademarks or trademarks of their
respective holders.
Approved Icom optional equipment is designed for optimal
performance when used with an Icom transceiver.
Icom is not responsible for the destruction or damage to an Icom
transceiver in the event the Icom transceiver is used with equipment
that is not manufactured or approved by Icom.
Some options may not be available in some countries. Please ask
your dealer for details.
Microphone
Microphone hanger
and screw set
Microphone
hanger cable
DC power cable
Sponges*
2
Flat washers
Spring washers
Bracket bolts
Mounting screws
(5×12)
Self-tapping screws
(5×16)
Nuts
Function name
stickers*
1
*
2
Used for labelling the programmable
function keys according to their
assinged functions.
Used for optional unit installation.
Ask your dealer for details.
*
1
Mounting bracket
ANTENNA CONNECTOR
IGNITION LEAD
D-Sub 25-pin
Connect to external equip-
ment.
MICROPHONE HANGER
Connect the supplied mi-
crophone hanger to ground
for the ON/OFF Hook func-
tions. (See page 1)
EXTERNAL
SPEAKER JACK
Connect a 4–8
ø
external speaker.
DC POWER
RECEPTACLE
Connects to a 13.2 V
DC power supply. Pay
attention to polarities.
Make sure the ground
terminal of the DC
power supply is
grounded.
q
w
r
Optional speaker
e
t
Microphone
y
To the antenna
DC power
supply 13.2 V
to an
AC
outlet
Fuse
10 A
Black
Red
q
w
e
r
t
y
R
WARNING! NEVER
remove the fuse holder
from the DC power cable.
D
For base station operation
D
For mobile operation
Black
Red
12V
Battery
q
D-Sub 25-pin
Connect to external
equipment.
t
r
y
Optional
speaker
e
w
Microphone
ANTENNA CONNECTOR
Connects to the antenna. Ask your dealer
about antenna selection and placement.
EXTERNAL SPEAKER JACK
Connect a 4–8
ø
external speaker.
e
q
w
MICROPHONE HANGER
Connect the supplied microphone
hanger to the vehicle’s ground for the
ON/OFF Hook functions. (See page 1)
IGNITION LEAD
Connects to an ignition line.
R
DC POWER
RECEPTACLE
Connects to a 12 V
DC battery. Pay
attention to polarities.
Do not put a pressure to this lead.
Binding to the DC power cable is
recommended.
r
t
y
Solder
Crimp
NOTE: Use the terminals as shown
below for the cable connections.
Antenna
R
WARNING! NEVER
connect to a 24 V bat-
tery. This could dam-
age the transceiver.
R
WARNING! NEVER
remove the fuse holder
from the DC power cable.
If the transceiver becomes dusty or dirty, wipe it clean with a
soft, dry cloth.
DO NOT
use harsh solvents such as benzene or
alcohol, as they may damage the transceiver
surfaces.
CLEANING
The crossed-out wheeled-bin symbol on your
product, literature, or packaging reminds you
that in the European Union, all electrical and
electronic products, batteries, and
accumulators (rechargeable batteries) must be
taken to designated collection locations at the
end of their working life. Do not dispose of these products
as unsorted municipal waste.
Dispose of them according to the laws in your area.
DISPOSAL