1. DL manuals
  2. Icom
  3. Transceiver
  4. IC-F5062D
  5. Operating Manual

Icom IC-F5062D Operating Manual

Other manuals for IC-F5062D: Instruction Manual, Instruction Manual, Instructions

Summary of IC-F5062D

  • Page 1

    Operating guide operating guide for ic-f5062d/f6062d biis 1200/dpmr operation.

  • Page 2

    I thank you for purchasing this icom transceiver. The binary interchange of information and signalling (biis) 1200 and digital private mobile radio (dpmr) system func- tions are built into your ic-f5062d/f6062d transceiver. Read all instructions carefully and completely before using the transceiver....

  • Page 3

    Table of contents ii important .......................................................................... I table of contents ........................................................ Ii 1 preparation............................................................1–2 ■ programmable function keys ...........

  • Page 4: Preparation

    1 1 preparation ■ programmable function keys the following functions can be assigned to [up], [down], [p0], [p1], [p2], [p3] and [p4] programmable function keys. Consult your icom dealer or system operator for details con- cerning your transceiver’s programming. If the programmable function names ar...

  • Page 5

    D for biis 1200 and dpmr operations the following key functions are useful for both biis 1200 and dpmr operations. Status up, status down ➥ push to select a status message. ➥ when the automatic scroll function is activated, push to cancel it, if desired. ➥ when an sdm that includes more than 12 char...

  • Page 6: Biis 1200 Operation

    3 2 biis 1200 operation ■ biis 1200 operation the binary interchange of information and signalling (biis) 1200 standard is the best choice to add a data service to an existing system. It enables digital communications, signalling and message exchanges with analog transceivers. The biis system provid...

  • Page 7

    4 2 biis 1200 operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 d receiving a group call q when a group call is received: • rings sound. • “ ” appears and the mute is released. • “ ” appears or blinks, depending on the pre-programmed set- tings. • the group id (or name) and the calling station’s id (...

  • Page 8

    5 2 biis 1200 operation d receiving a status message q when a status message is received: • rings sound. • the calling station’s id (or name) and the status message blink. R x s t a t u s 0 1 1 2 3 4 the received status message calling station’s id w push [moni (audi)] to return to the stand-by mode...

  • Page 9

    6 2 biis 1200 operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 d displaying a received call record — queue channel mode the transceiver memorizes up to 3 calling station’s ids. When the 4th call is received, the oldest call record will be removed, and the last received call will be added. When the t...

  • Page 10: Transmitting A Call

    7 2 biis 1200 operation ■ transmitting a call d general • editing an id if the transceiver has a key assigned to the tx code enter function, you can edit an id within the allowable digits. Q push [tx code enter] to enter the id edit mode. • the digit to be edited blinks. W push [tx code enter] to se...

  • Page 11

    8 2 biis 1200 operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 d transmitting a status message you can send a pre-programmed status message to an indi- vidual station or to group stations. There are 24 status messages that can be sent, and status 22 and 24 messages have designated meanings. Status 2...

  • Page 12

    9 2 biis 1200 operation d transmitting an sdm you can send a pre-programmed sdm to an individual station or to group stations. The transceiver has 8 memories to store messages. Q push [biis button] to enter the call code memory mode. • “ ” appears. • the pre-programmed id is displayed. W push [ch up...

  • Page 13

    10 2 biis 1200 operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 • usable characters key [0] [1] [2] [3] [4] [5] [6] [7] [8] [9] characters 0 ! ? ' " , ; : _ ( ) [ ] 1 (space) # * / + - = & % $ @ ^ 2 a b c a b c 3 d e f d e f 4 g h i g h i 5 j k l j k l 6 m n o m n o 7 p q r s p q r s 8 t u v t u v 9...

  • Page 14: Position Data Transmission

    11 2 biis 1200 operation ■ position data transmission when a gps receiver is connected to the transceiver, the position data (longitude and latitude) can be automatically transmitted. Ask your dealer or system operator for connec- tion details. The position data is transmitted: • when status 24 (gps...

  • Page 15: Horn Output

    12 2 biis 1200 operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ■ horn output when a horn is connected to the d-sub 25-pin connector of the transceiver, the automatic honking function is usable, de- pending on the pre-programmed settings. When a status message is received, the transceiver controls t...

  • Page 16: Dpmr Operation

    13 3 dpmr operation 13 ■ dpmr operation the ic-f5062d and ic-f6062d provide digital private mobile radio (dpmr) operation that meets the 6.25 khz bandwidth requirements for narrow band operation. This increases ef- ficiency of channel allocation and use of the spectrum. Note: during dpmr operation, ...

  • Page 17

    14 3 dpmr operation 3 16 15 14 13 12 11 10 9 8 7 6 5 4 2 1 14 d receiving a group call q when a group call is received: • rings sound. • “ ” appears and the mute is released. • “ ” appears or blinks, depending on the pre-programmed set- tings. • the talkgroup id (or name) and the calling station’s i...

  • Page 18

    15 3 dpmr operation d receiving an sdm q when an sdm is received: • rings sound. • “ ” appears. • the calling station’s id (or name) and the sdm are displayed. M e s s a g e 1 i d 0 0 0 0 0 0 1 the received sdm appears calling station’s id note: when the sdm includes more than 12 charac- ters, it au...

  • Page 19

    3 dpmr operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 16 d receiving an ambience listening call if an individual call with an ambience listening command is received from a specified station, the transceiver will auto- matically transmit its microphone audio. • the hm-148g or hm-152 hand microphone...

  • Page 20

    17 3 dpmr operation d displaying a received call log entry depending on the pre-programmed setting, the transceiver stores up to 10 call log entries. Individual voice, status and sdm call log entries are stored. When an 11th call is re- ceived, the oldest call log entry will be removed, and the last...

  • Page 21: Transmitting A Call

    3 dpmr operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 18 ■ transmitting a call dpmr operation allows you to make a call to a specific sta- tion (individual call) or to a particular group (talkgroup call). Other digital mode transceivers on the channel will not re- ceive a call that does not match ...

  • Page 22

    19 3 dpmr operation d transmitting a voice call note: if you want to make a call to the pre-programmed id, skip step q and w, and directly go to step e. Q push [dpmr button] to enter the id selection mode. • the pre-programmed id is displayed. W push [ch up] or [ch down] to select a desired individu...

  • Page 23

    3 dpmr operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 20 d transmitting a status message you can send a pre-programmed status message to an indi- vidual station or to group stations. There are 32 status messages that can be sent. Q push [dpmr button] to enter the id selection mode. • the pre-progr...

  • Page 24

    21 3 dpmr operation d transmitting an sdm you can send a pre-programmed sdm to an individual station or to group stations. The transceiver has 10 memories to store messages. Q push [dpmr button] to enter the id selection mode. • the pre-programmed id is displayed. W push [ch up] or [ch down] to sele...

  • Page 25

    3 dpmr operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 22 d direct message input while displaying an sdm, you can edit or change the mes- sage using the optional hm-152t hand microphone . Q push [dpmr button] twice to enter the application selec- tion mode. • “ status” is displayed. W push [ch up] ...

  • Page 26

    23 3 dpmr operation d transmitting an emergency call if a digital channel is used as the emergency channel, the transceiver can access the dpmr emergency mode. If your transceiver is programmed for silent operation, you can transmit emergency calls without the beep sounding or the display changing. ...

  • Page 27: Transmitting A Command

    3 dpmr operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 24 ■ transmitting a command the following individual calls allow you to send special com- mands. These calls will function if you are designated as a specific station. Ask your dealer for details. D transmitting an ambience listening call an am...

  • Page 28

    25 3 dpmr operation d transmitting a kill call a kill call allows you to send a command that will disable the target station. Q push [dpmr button] to enter the id selection mode. • the pre-programmed id is displayed. W push [ch up] or [ch down] to select a desired individual id. E push [dpmr button]...

  • Page 29: Position Data Transmission

    3 dpmr operation 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 26 ■ position data transmission when a gps receiver is connected to the transceiver, the position data (longitude and latitude) can be automatically transmitted. Ask your dealer or system operator for connec- tion details. The position data is ...

  • Page 30: Horn Output

    27 3 dpmr operation ■ horn output when a horn is connected to the d-sub 25-pin connector of the transceiver, the automatic honking function is usable, de- pending on the pre-programmed settings. When a status message is received, the transceiver controls the vehicle’s horn to sound an alert for the ...

  • Page 31

    Memo.

  • Page 32

    1-1-32 kamiminami, hirano-ku, osaka 547-0003, japan a-6841-2eu © 2010 icom inc..