- DL manuals
- Icom
- Transceiver
- IC-F9511HT
- User Manual
Icom IC-F9511HT User Manual
Summary of IC-F9511HT
Page 1
Ic-f9511 radioÊg uide yourÊ smart p25Ê choice p25Êt runking p25Êcon ventional analogÊcon ventional allÊinÊone novemberÊ 2009 110wÊh ighÊpo weredÊf 9511htÊv ersionÊsho wn.
Page 2
Foreword and disclaimer fore ord foreword disclaimer this handbook provides detailed information about the ic-f9510 series vhf and uhf mobile transceivers based on the latest firmware rev.1.50. The information in this document has been carefully checked, and is believed to be correct and accurate. H...
Page 3
Table of contents 1 introduction 1-1 company profile · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 4 2 over view 2-1 product line up · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·...
Page 4
1 introduction 1-1 company profile company profile company profile icom, the wireless communication experts icom inc. Is a company located in osaka, japan, and is a manufacturer of wireless communication products. Since icom’s establishment in 1954, we have had a long record as a trusted manufacture...
Page 5
2 overview 2-1 product line up vhf p25 trunking mobile transceivers (usa version) (usa version) (usa v i ) ic-f9511t / ic-f9521t / ic-f9523t includes supplied hand microphone hm-148g and external speaker sp-22 (usa version) uhf p25 trunking mobile transceivers uhf p25 trunking mobile transceivers (u...
Page 6
2-2 common features apco p25 digital radio system – conventional and trunking in one radio ! Apco project p25 digital migration is now an inevitable trend for federal, state and local government users of 2-way radios. The ic-f9510 series, much more evolved from the ic-f1700 series, are not simply en...
Page 7
Common features tactical group function tactical group function the tactical group function allows you to copy memory channels to the tactical zone and temporarily regroup memory channels. Using the optional zone copy cable, memory channels in the tactical zone can be transferred from a master radio...
Page 8
Common features other features ( ic-f9510 series ) • wide frequency coverage (vhf 136–174mhz / uhf 400-470mhz, 450- 520mhz) • fm wide/narrow channel spacing *1 • built-in audio compander *1 • built-in inversion type voice scrambler *1 • heavy duty microphone, hm-148 • ntia vhf specification complian...
Page 9
2-3 ip classification codes ingress protection (ip) ratings are developed by the european committee for electro technical standardization. International standard iec 60529 outlines an international classification system that describes the sealing characteristics of electrical equipment. The classifi...
Page 10
2-4 project 25 what is project 25? Project 25 (p25) is a standard for the manufacturing of interoperable digital 2-way wireless communications products. Developed in north america under state, local and federal representatives and telecommunications industry association (tia) governance, p25 is gain...
Page 11
2-5 function and specifications comparison model no. Ic-f9511ht ic-f9511s ic-f9511t ic-f9521s ic-f9521s ic-f9521t ic-f9521t version #01 #01 #05 #01 #11 #05 #15 #01 #05 destinations usa-01 usa-01 usa-01 usa-01 usa-01 usa-01 usa-01 keypad or speaker 10 keypad speaker 10 keypad speaker speaker 10 keypa...
Page 12
2-5 function and specifications comparison model no. Ic-f9523s ic-f9523s ic-f9523t ic-f9523t version #02 #12 #06 #16 #02 #12 destinations exp-01 exp-01 exp-01 exp-01 keypad or speaker speaker speaker 10 keypad 10 keypad type approval - - - - fips 140-2 certified *1 *2 - - - - function comparison ctc...
Page 13
3 accessories 3-1 supplied accessories connection 3-1-1 ic-f9511s, ic-f9511t ic-f9511s supplied accessories function name microphone microphone hanger and screw set speaker *1 dc power cable key caps function name ic-f9511t function name stickers *2 dc power cable key caps function name stickers *2 ...
Page 14
Ic-f9511s, ic-f9511t function name stickers there are no names on the programmable function keys since the functions can be freely assigned to these keys. 1 attach the supplied function name stickers as below to the appropriate keys for easy ■ antenna a key element in the performance of any communic...
Page 15
3-1 supplied accessories connection 3-1-2 ic-f9511ht ic-f9511ht supplied accessories self-tapping screws (m5x16) mounting screws (m5x12) microphone spring washers (m5) black and red cables with fuse holder mounting bracket for main unit microphone hanger and screw set flat washers (m5) dc power cabl...
Page 16
Ic-f9511ht mounting the transceiver main unit the universal mounting bracket supplied with your transceiver allows overhead mounting. • mount the main unit securely with the 4 supplied screws to a thick surface which can support more screws to a thick surface which can support more than 8 kg (17.63 ...
Page 17
Speaker connector information ic-f9511ht 2 connect the separation cable to the controller as speaker connector information connector’s front view ▒ when the horn function is ▒ activated, horn1 and ▒ horn2 are shorted. 2 connect the separation cable to the controller as shown below. • the cable can b...
Page 18
3-2 mobile radio installation ¾ antenna many types and sizes of antennas are available, whatever you choose you need to consider some basic points : check points the locations to obtain check if there are installation instructions available for your car. Vehicle manufacturer or agent. Check that rad...
Page 19
Mobile radio installation ¾ installation start the installation with any mechanical work that is required for fitting the radio mount, cables, etc. Before drilling any hole in a vehicle check exactly what is behind the panel that you are drilling. When drilling a hole always use a drill with a “stop...
Page 20
3-3 d-sub 25 pin configuration d-sub accessory connector the ic-f9511 series has a d-sub 25 pin acc connector for connecting various external devices. D-sub 25 pin configuration d sub 25 pin configuration pin no. Pin name description 1 h_out2 22w hi power amp btl output 2 txd serial data output *bui...
Page 21
3-4 additional function keys additional function keys three programmable function keys can be installed externally. – opf0 / opf1 / opf2 to activate the assigned functions in these buttons, soldering is required. ¾ program a desired function with the cloning software as shown below. ¾ remove the fro...
Page 22
3-5 optional accessories microphones current options available are shown below. (some options are not available for all countries.) encrytion units hm-152 regular hand microphone hm-152t dtmf microphone hm-148g heavy duty microphone (self-ground) sm-25 convenient for dispatching, equipped with monit...
Page 23
3-6 self-grounding microphones hm-148g / hm-148t th hm 148g d hm 148t h d t lf the hm-148g and hm-148t, heavy duty self- grounding microphones are designed to do without connecting wires to the vehicle’s ground. The self- grounding is enabled by a newly designed microphone hanger. Hm-148g (plain typ...
Page 24
3-7 optional internal unit installation ¾ ic f9511ht this is the instruction on how to install the ut 125 ¾ ic-f9511ht 1 unscrew 6 screws from the top cover, and remove the top cover, seal plate and main cover. 2 remove 2 cushions from the main unit. This is the instruction on how to install the ut-...
Page 25
■ fuse replacement clock backup battery replacement 3-8 maintenance ■ fuse replacement fuses should be installed in the fuse holder of the black and red power cables, respectively. If a fuse blows or the transceiver stops functioning, track down the source of the problem if possible, and replace the...
Page 26
4-1 operation and function 4-1-1 operation and function ic-f9511s, ic-f9511t ▒ note : operation of the ic-f9521/f9523/s/t is also based on this instruction. 10 keypad model up/down key si l d l ➊ af volume control knob rotate the knob to adjust the audio output level. • minimum audio level is pre-pr...
Page 27
4-1-2 function display ic-f9511s/t,f9521s/t, f9523s/t ➊ received signal strength indicator indicates relative signal strength level. ➒ alphanumeric display displays an operating channel number, channel name, set mode contents, dtmf code, etc. ➋ low power indicator appears when low output power is se...
Page 28
Programmable function keys scan b start/stop key 4-1-3 programmable function keys ic-f9511s/t,f9521s/t,f9523s/t programmable function keys the following functions can be assigned to [dial]*, [up], [down], [p0], [p1], [p2], [p3] and [p4] programmable function keys. Consult your icom dealer or system ...
Page 29
Public address key user set mode key programmable function keys ic-f9511s, ic-f9511t push to activate the public address (pa) function for voice amplification. When the pa function is activated, the audio output can be controlled from the transceiver separately with [ch up] or [ch down] or rotate [c...
Page 30
4-1-4 operation and function ic-f9511ht ➊ af volume control knob rotate the knob to adjust the audio output level. • minimum audio level is pre-programmed. ➋ function display ➒ microphone connector connect the supplied or optional microphone. • when you connect a microphone, be sure to fit the conne...
Page 31
4-1-5 function display ic-f9511ht ➊ received signal strength indicator indicates relative signal strength level. ➒ alphanumeric display displays an operating channel number, channel name, set mode contents, dtmf code, etc. ➋ low power indicator appears when low output power is selected. * when high ...
Page 32
P g bl f ti k scan add/del (tag) key 4-1-6 programmable function keys ic-f9511ht programmable function keys the following functions can be assigned to [up], [down], [p0], [p1], [p2], [p3] and [p4] programmable function keys. Consult your icom dealer or system operator for details concerning your tra...
Page 33
Programmable function keys ic-f9511ht rx speaker key push to turn the rx speaker function on or off. When the rx speaker function is turned on, the received audio can be heard via the external speaker. • this function is available when the external speaker is additionally connected. • this function ...
Page 34
Programmable key functions programmable key f analog apco p25 4-1-7 preparation for operation (ic-f9510 series) programmable key functions the programmable key functions can be assigned to the following keys and switches; mobile transceivers: [up]*, [down]*, [p0], [p1], [p2], [p3] and [p4]. *availab...
Page 35
Analog mode operation when this function is turned on, and a signal is input preparation for operation analog mode operation (common operation) re-dial key push to transmit the last-transmitted dtmf code. Dtmf autodial key ➥ push to enter the dtmf channel selection mode. From an external unit that i...
Page 36
Apco p25 mode operation preparation for operation apco p25 mode operation (common operation) zeroize key push and hold this key for 1 sec to zeroize the encryption key data which is programmed by the key loader. After this operation is performed, the transceiver cannot decrypt the encrypted code. ➥ ...
Page 37
Talkgroup key preparation for operation encryption switch (apco p25 mode only) talkgroup key push to directly enter the talkgroup id selection mode. Then select the desired talkgroup id code using [ch up]/[ch down] or [ch up/down]. • during the talk-group id selection, push to cancel and return to n...
Page 38
4-1-8 basic operation (ic-f9510 series) turning power on automatic scan type: g when you use the transceiver for the first time, or after the transceiver has not been used for a long time, make sure to check the date and time indication after turning the power on. If the time and date are not correc...
Page 39
2 push and hold [clock] for 1 sec to enter the time basic operation • time-out timer after continuous transmission for the pre- programmed time period, the time-out timer is activated, causing the transceiver to stop transmitting. • penalty timer once the time-out timer is activated, transmission is...
Page 40
H c c basic operation g push [ch up] or [ch down], or rotate [ch up/down]* to input the ‘hour’ data for wake up time. After entering, push [clock] to set. H push [ch up] or [ch down], or rotate [ch up/down]* to input the ‘hour’ data for sleep time. After entering, push [clock] to set. • the ‘minutes...
Page 41
Basic operation e push [p0] several times to select the appropriate item. Then, push [up] or [down] or rotate [dial] *1 to set the desired level/condition. • available set mode functions are backlight, lcd contrast, beep, beep level, ringer level, sql level, af min. Level, mic gain, horn, battery vo...
Page 42
4-1-9 analog mode operation (ic-f9510 series) ■ dtmf transmission if the transceiver has [dtmf autodial] assigned to it, the automatic dtmf transmission function can be used. Up to 8 dtmf channels are selectable. 1 push [dtmf autodial]— a dtmf channel appears. 2 push [ch up] or [ch down], or rotate ...
Page 43
■ general 4-1-10 apco p25 mode operation (ic-f9510 series) ■ general apco project-25 (p25) is designed for public safety digital radio, and allows you to make a call to a specific station (individual call) or to a particular group (talk-group call or announcement call*) in the conventional and trunk...
Page 44
If the control channel is found, the transceiver ■ site lock function apco p25 mode operation , attempts registration and group affiliation. Blinks when registration and group affiliation are performed. ■ site lock function (p25 trunking mode only) the transceiver can be locked into the current site...
Page 45
■ individual call receiving apco p25 mode operation ■ individual call transmitting individual call allows you to make a call to a specific station, and it provides private communication. [individual] key assignment is necessary to transmit the individual call. 1 push [individual] to enter the indivi...
Page 46
2 p h d h ld [ptt] d k i t th apco p25 mode operation 2 select the desired talkgroup id (or name) using [ch up]/[ch down], or [ch up/down]. ▒ note: when ‘65535’ is selected as the ▒ talkgroup id all call is an open call to 2 push and hold [ptt] and speak into the microphone. ▒ note: only one station...
Page 47
2 push [digital button] again to enter the 2 an acknowledgement is automatically apco p25 mode operation individual id selection mode. • a pre-programmed id name is displayed. • when the id name is not programmed, the id code is displayed. Transmitted. •the transmit indicator lights red. 3 push any ...
Page 48
5 p h [ptt] i h di i hibi i l ✔ for trunking mode operation apco p25 mode operation 5 push [ptt] to transmit the radio inhibit signal to the target station. • the transmit indicator lights red. • “please wait” is displayed. 6 release [ptt]. • “ack received” is displayed after receiving an acknowledg...
Page 49
Apco p25 mode operation receiving (reviving the transceiver) a radio uninhibit signal revives the inhibited transceiver. 1 when an inhibited transceiver receives a radio uninhibit signal, the busy/transmit indicator does not light because the radio inhibit is still activated. 2 an acknowledgement is...
Page 50
✔ for trunking mode operation: receiving apco p25 mode operation this function is available only for a dispatcher in the trunking mode. 1 push [digital button] to enter the digital call type selection mode. 2 push [ch up] or [ch down], or rotate [ch up/down] to select “rdo check.” ➥ when a radio che...
Page 51
5 push [digital button] (or [digital status]) again to ■ short message apco p25 mode operation enter the individual id selection mode. • a pre-programmed id name is displayed. • when the id name is not programmed, the id code is displayed. G transmitting the transceiver can send one of up to 10 diff...
Page 52
■ st t q f ti apco p25 mode operation 6 push [ch up] or [ch down], or rotate [ch up/down] to select the desired id (or name). • push and hold [digital button] (or [digital message]) for 1 sec to cancel and return to normal operation. • the id can be edited with the 10-keypad*. (depending on the pre-...
Page 53
Receiving ▒ to edit the phone number with the 10-keypad: apco p25 mode operation ➥ when a status transmitted status message is automatically transmitted. • the busy indicator lights green while receiving, and lights red while transmitting an acknowledgement or the status message. • the function disp...
Page 54
■ announcement function moreover while in the emergency mode emergency apco p25 mode operation ■ announcement function transmitting the announcement function allows you to send an announcement signal to only a specific group, and only in the trunking mode. The members of the target group can only re...
Page 55
Transmitting an emergency call along with apco p25 mode operation 2 an acknowledgement is automatically transmitted transmitting an emergency call along with an emergency alarm 1 push and hold [emergency]*1 for the specified time period*2 to enter the emergency mode. • the countdown starts immediate...
Page 56
Apco p25 mode operation key fail indication the transceiver indicates “key fail” for the specified time period* when the common key reference (ckr) of the selected channel is not stored in the encryption unit. Decryption multi keys function when this function is enabled, the transceiver l th t ft i ...
Page 57
■ tactical group function clearing the tactical group in zone 128 4-1-11 tactical group function (ic-f9510 series) p the tactical group function enables commonly used channels to be placed together in zone 128. ▒ important! ▒ the tactical group operation should be enabled ▒ by your dealer with the c...
Page 58
Tactical group function ▒ note: when the “dealer” indication does not ▒ note: when the dealer indication does not ▒ clear after entering 6 digits, the input code ▒ number may be wrong. In that case, turn the ▒ power off, and start over. ▒ note: a default passcode is “159357”; ▒ push [p1], [p0], [p4]...
Page 59
4-1-12 apco p25 trunking and conventional basic functions this list shows each function that is supported by p25 trunking mode, by p25 conventional mode, or by both. Trunking system conventional system functions 1 multiple network support enable the radio to operate on the multiple different network...
Page 60
Apco p25 trunking and conventional basic functions trunking system conventional system functions 21 priority group monitor monitoring the arrival of groupcall signals with high priority level. 22 emergency alarm emergency alarm. 23 call alert call alert. 24 short message short message function 25 st...
Page 61
Apco p25 trunking and conventional basic functions trunking system conventional system functions 49 packet data arp packet data communication ready (apr) 50 udp/ip (support for os i/f or lwip implementation) udp/ip adaptable. 51 slip/ppp (support for os i/f or lwip implementation) slip/ip adaptable....
Page 62
4-2 cloning software cs-f9010/f9510 4-2-1 basic setup of cloning software ■ getting started ■ gett g sta ted ◇ this cloning software is designed to perform data setting and cloning for the ic-f9510 series vhf p25 trunking mobile transceivers. ◇ help window: cs-f9010/f9510 has a help window to descri...
Page 63
■ connections basic setup of cloning software all cloning operations are performed from the computer’s keyboard — the operation required on the transceiver side is; 1 first, connect the cloning cable as illustrated below. 2 then, rotate [vol] to turn power on. Pc to usb port opc-1122u (usb type) to ...
Page 64
■ programming information basic setup of cloning software ■ programming information we recommend that you should read out all the transceiver's data before start entering/editing parameters even when the transceiver is factory fresh. 1 double-click the desired cell in the contents list screen direct...
Page 65
Related items 4-2-2 cloning items for ic-f9510 series connect the cloning cable, opc-1122u to the [mic] connector first and then push [power] to turn power on. Click or select in the [clone] menu to read out all radio's programmed cloning data into pc before editing with this cloning related items c...
Page 66
Digital ¾ remote monitor set the tx to make a call to listen to the targeted cloning items set the tx to make a call to listen to the targeted radio's audio frequency without requiring any action from the targeted radio user. ¾ phone number list make a list for easy recognition of the phone number. ...
Page 67
Cloning items ¾ dtmf settings set the time period/signal length for the dtmf timer, first timer, * # timer. Continuous tone external i/o ¾ ch switch table available for mobile radios only. ¾ continuous tone select the desired ctcss frequency from the list or enter a 3-digit dtcs code with polarity, ...
Page 68
4-2-3 apco p25 trunking – cloning software setup apco p25 trunking when "system" is selected for the coverage type, apco p25 trunking this is the overall construction of the p25 trunking system. This home wacn id and home system id must match to those of a control channel to register for the channel...
Page 69
Apco p25 trunking – cloning software setup coverage type select the coverage type for the area that the radio is allowed to roam from unrestricted, system, rfss, site and channel. When a ch id list with no valid channel is selected, "x" appears in the cell and "system registration" in the tree view ...
Page 70
Apco p25 trunking – cloning software setup trigger enable this function activates the back ground scan only when the received signal strength indication (rssi) level of a control channel becomes lower than the level in hunt threshold more than the number of times set in hunt delta below. Select "ena...
Page 71
Hunt list tx ch id apco p25 trunking – cloning software setup even if the available number of control channels in a list has been set by the capacity item in the list operation screen, you can add or delete a channel in each list. To create a new channel, point to the cell on the enter a control cha...
Page 72
Apco p25 trunking – cloning software setup to create a new roaming area, point to the cell on the [new] line which is located at the bottom of the screen, then double click or right click to display the edit menu and click [edit...Enter] to create a new area. Valid lowest channel frequency (mhz) ent...
Page 73
Otar setting ckr 4-2-4 otar – clone software setup g for details on how to set up the otar function in cloning software, please see the instructions below. ¾ cai set the common key reference (ckr) used for the system within the range of 1 to 4095. The ckr is used for encrypting key management messag...
Page 74
Otar – clone software setup unconfirmed the radio uses unconfirmed packets to exchange kmms with the kmf.The radio transmits kmms (registration and deregistration) to the kmf with kmm enc on/off select whether or not to encrypt key management messages (kmms). Gateway address (available when "ipv4 st...
Page 75
Otar – clone software setup ¾ general delayed acknowledge interval timer (sec) enter the time period for interval timer within the range of 0.0 to 25.5 (in 0.1 sec steps). The radio delay transmitting acknowledgment for this set period after receiving a key management message (kmm) that requests del...
Page 76
4-3 apco p25 access code types the ic-f9510 series provides capability to set up your own talk groups and quiet stand-by when others are ctcss or dtcs like operation ■ memory ch > zone the ic f9510 series provides capability to set up your own talk groups and quiet stand by when others are talking. ...
Page 77
4-4 scan ■ scan list a total of 17 scanning groups are available for a wide variety and flexible scanning operation. In this screen, program scanning condition for each group. Channels included in the scan group [zone] are scanned when the channels are in the same zone with the scan start channel. 2...
Page 78
The compatibility of the previous and current scan scan tx ch the compatibility of the previous and current scan mode: tx ch select the desired channel as the transmission channel. Last ch transmission is performed in the channel that the scan stopped last. If it is no last channel, the scan start c...
Page 79
Scan last ch scan is cancelled in the channel that the scan stopped last. If it is no last channel, the scan start channel is selected when the scan is canceled during scanning. Prio-a ch scan is cancelled in the priority a channel channel. Prio-b ch scan is cancelled in the priority b channel. Star...
Page 80
4-5 display text ■ display text enter up to a 24-character text for easy recognition of the scan group. The programmed texts are indicated in the scan selection mode. ■ text-mobile right click to display the [edit... Enter] menu and ➣ you can use and make an original character that is edited in the ...
Page 81
4-6 voice scrambling/encryption 4-6-1 voice scrambling/encryption ■ voice scrambling function ■ voice scrambling function the optional voice scrambler unit provides high performance private communication between stations with the same scrambler code. The ic-f9510 series has a built-in inversion type...
Page 82
4-6 voice scrambling/encryption 4-6-2 encryption setup activating encryption p25 radios have the ability to use des or aes encryption. To enable encryption, you will need a ckr (common key reference). The kvl 3000 plus key loader from motorola creates this key. ¾ obtaining a ckr from the kvl 3000 pl...
Page 83
What is otar ? 4-7 otar without otar, the operator has to collect all radios and reprogram them to change the keys. Or a technician must go around and visit all the radio sites with a pc and a programmer just to change keys – it is time-consuming. What is otar ? Otar or over-the-air-rekeying is the ...
Page 84
Ic-f9510 series has dvsi ambe +2™ new 4-8 apco p25 dvsi ambe+2™ vocoder the mean opinion score values vocoder ready digital voice systems, inc. Specializes in low rate, high-quality voice compression products for use in digital communications and storage applications. Their products include vocoders...
Page 85
The information about the apco p25 and ic-f9510 series is also available on the icom america inc. Home a-2 useful information on icom america’s web site page. Please browse http://www.Icomamerica.Com/en/default.Aspx icom global site icom america inc. Home page 1 basic information about p25 these mat...
Page 86
¾ the following instruction manuals are available on the icom web site. A-3 other materials g url: http://www.Icom.Co.Jp/world/index.Html o ti g g id instruction manual instruction manual m bil r di ¾ the following materials are available upon request through local icom distributors in your region. ...
Page 87: Ic-F9511
Ic-f9511 radioÊg uide 2380Ê 116thÊ avenueÊ ne bellevue,Ê waÊ 98004 phone:Ê 425-454-8155 fax:Ê 425-454-1509 www.Icomamerica.Com forÊp eopleÊw hoÊ makeÊ smartÊ choices.