Instruction manual im505 vhf marine transceiver.
Ii forword thank you for purchasing this icom product. The ic-m505 vhf marine transceiver is designed and built with icom’s state of the art technology and craftsmanship. With proper care, this product should provide you with years of trouble- free operation. We want to take a couple of moments of y...
Ii in case of emergency if your vessel requires assistance, contact other vessels and the coast guard by sending a distress call on channel 16. Using channel 16 distress call procedure 1. “mayday mayday mayday.” 2. “this is ...............” (name of vessel). 3. Say your call sign or other indication...
Iii doc declaration of conformity we icom inc. Japan 1-1-32, kamiminami, hirano-ku osaka 547-0003, japan kind of equipment: vhf marine transceiver this compliances is based on conformity with the following harmonised standards, specifications or documents: i) en 301 025-2 v1.2.1 (2004-09) ii) en 301...
Iv table of contents forword ............................................................................................... I important ............................................................................................. I explicit defenitions .................................................
V rwarning! Never connect the transceiver to an ac outlet. This may pose a fire hazard or result in an electric shock. Rwarning! Never connect the transceiver to a power source of more than 16 v dc or use reverse polarity. This will ruin the transceiver. Rwarning! Never cut the dc power cable betwee...
1 1 operating rules d priorities • read all rules and regulations pertaining to priorities and keep an up-to-date copy handy. Safety and distress calls take priority over all others. • you must monitor channel 16 when you are not operating on another channel. • false or fraudulent distress signals a...
2 panel description 2 ■ front panel function display (p. 4) speaker q e r t y w u i o !0 !1 !2 !3 q distress key [distress] push for 5 sec. To transmit a distress call. (p. 23) w dsc menu key [menu] push to toggle the dsc menu appear or disappear. (p. 15) e clear key [clr] push to cancel the entered...
3 2 panel description u channel selector [channel•enter] ➥ rotate to select the operating channels, set mode set- tings, etc. (pp. 6–8, 55) ➥ while pushing and holding [h/l], rotate to adjust the brightness of the lcd and key backlight. (p. 10) ➥ push to enter the input channel comment, selected ite...
4 2 panel description ■ function display busy 25w int call rx dup scram tag normal scan - 34°34.506n 123°23.236w local 1:10 calling q w e r t y !4 !3 !1 !0 !2 i o u q rx speaker indicator (p. 51) appears during the rx speaker mode. W power indicator (p. 8) ➥ “25w” appears when high power is selected...
5 2 panel description 2 !1 position indicator ➥ shows the current position data when a gps re- ceiver is connected, or the time data is manually pro- grammed. • “??” may blink every 2 sec. Instead of position data when the gps position data is invalid. The last position data is held for 23.5 hours o...
6 basic operation 3 ■ channel selection d channel 16 channel 16 is the distress and safety channel. It is used for establishing initial contact with a station and for emergency communications. Channel 16 is monitored during both du- alwatch and tri-watch. While standing by, you must monitor channel ...
7 3 basic operation 3 d international channels there are pre-programmed 57 international channels for the ic-m505. Q push [dial•dual/grp] to select a regular channel. W while pushing and holding [h/l], push [dial•dual/ grp] to change the channel group, if necessary. • “int” appears when internationa...
8 3 basic operation ■ receiving and transmitting caution: transmitting without an antenna may dam- age the transceiver. Q push [power] to turn power on. W set the audio and squelch levels. ➥ rotate [sql] fully counterclockwise in advance. ➥ rotate [vol] to adjust the audio output level. ➥ rotate [sq...
9 3 basic operation 3 ■ call channel programming you can program the call channel with your most often-used channels in each channel group for quick recall. Q while pushing and holding [h/l], push [dial•dual• grp] one or more times to select the desired channel group (int, usa, atis or dsc) to be pr...
10 3 basic operation ■ channel comments the channels can be labelled with a unique alphanumeric id of up to 10 characters. Capital letters, small letters, 0 to 9, some symbols (/ . –) and space can be used. Q select the desired channel. • cancel dualwatch, tri-watch or scan in advance. W while pushi...
11 3 basic operation 3 ■ optional voice scrambler operation d activating the scrambler the optional voice scrambler provides private communica- tions. In order to receive or send scrambled transmissions you must first activate the scrambler function. To activate the func- tion, an optional scrambler...
12 scan operation 4 ■ scan types scanning is an efficient way to locate signals quickly over a wide frequency range. The transceiver has priority scan and normal scan. Set the tag channels (scanned channel) before scanning. Clear the tag channels which inconveniently stop scanning, such as those for...
13 4 scan operation 4 ■ setting tag channels for more efficient scanning, add the desired channels as tag channels or clear the tag for unwanted channels. Channels that are not tagged will be skipped during scan- ning. Tag channels can be assigned to each channel group (int, usa, atis or dsc) indepe...
14 dualwatch/tri-watch 5 ■ description dualwatch monitors channel 16 while you are receiving on another channel; tri-watch monitors channel 16 and the call channel while receiving another channel. Dualwatch/tri- watch is convenient for monitoring channel 16 when you are operating on another channel....
15 6 dsc operation 5 6 ■ mmsi code programming the 9-digit mmsi (maritime mobile service identity: dsc self id) code can be programmed at power on. This code programming can be performed only once. After the code programming, it can be changed only by your dealer or distributor. Q turn power off. W ...
16 6 dsc operation ■ mmsi code check the 9-digit mmsi (dsc self id) code can be checked. Q push [menu] to enter the dsc menu. W r o t a t e [ c h a n n e l ] t o s e l e c t “ s e t u p ,” p u s h [channel•enter]. --dsc menu-- select item position report polling request received calls distress setti...
17 6 dsc operation 6 ■ dsc address id a total of 100 dsc address ids can be programmed and named with up to 10 characters. D programming individual id q push [menu] to enter the dsc menu. W r o t a t e [ c h a n n e l ] t o s e l e c t “ s e t u p ,” p u s h [channel•enter]. --dsc menu-- select item...
18 6 dsc operation d deleting individual id q push [menu] to enter the dsc menu. W r o t a t e [ c h a n n e l ] t o s e l e c t “ s e t u p ,” p u s h [channel•enter]. --dsc menu-- select item position report polling request received calls distress setting ˘set up exit e rotate [channel] to select ...
19 6 dsc operation 6 d programming group id q push [menu] to enter the dsc menu. W r o t a t e [ c h a n n e l ] t o s e l e c t “ s e t u p ,” p u s h [channel•enter]. --dsc menu-- select item position report polling request received calls distress setting ˘set up exit e rotate [channel] to select ...
20 6 dsc operation d deleting group id q push [menu] to enter the dsc menu. W r o t a t e [ c h a n n e l ] t o s e l e c t “ s e t u p ,” p u s h [channel•enter]. --dsc menu-- select item position report polling request received calls distress setting ˘set up exit e rotate [channel] to select “del:...
21 6 dsc operation 6 ■ position and time programming a distress call should include the ship’s position and time data. If no gps is connected, your position and utc (uni- versal time coordinated) time should be input manually. They are included automatically when a gps receiver (nmea0183 ver. 2.0 or...
■ position and time indication when a gps receiver (nmea0183 ver. 2.0 or 3.01) is con- nected, the transceiver displays the current position and time. When no gps receiver is connected, the transceiver displays the manually entered position and time. A gps receiver appropriate for the ic-m505 is not...
23 6 dsc operation 6 ■ distress call a distress call should be transmitted, if in the opinion of the master, the ship or a person is in distress and requires im- mediate assistance. Never use the distress call when your ship or a person is not in an emergency. A distress call can be used only when i...
24 6 dsc operation ➥ a distress alert contains (default); • nature of distress : undesignated distress • position data : gps or manual input position data held for 23.5 hrs or until the power is turned off. ➥ the distress call is repeated every 3.5–4.5 min., until receiving an ‘acknowledgement.’ ➥ p...
25 6 dsc operation 6 regardless of a gps receiver (nmea0183 ver. 2.0 or 3.01) connection, the current position/time information appears in steps r and t. If the information is not nec- essary to be changed, push [channel•enter] or [16•c] several times to skip the data input steps. R the position inf...
26 6 dsc operation i after receiving the acknowledgment, reply using the mi- crophone. 25w int tag received distressack ˘ beep off> calling ➥ a distress alert contains (default); • nature of distress : selected nature of the distress • position data : gps or manual input position data is held for 23...
27 6 dsc operation 6 e rotate [channel] to select the desired pre-pro- grammed individual address or “manual input,” push [channel•enter]. • the id code for the individual call can be set in advance. (p. 17) • when “manual input” is selected, set the 9-digit mmsi number for the individual you wish t...
28 6 dsc operation y standby on channel 70 until an acknowledgement is re- ceived. --dsc menu-- individual call tx complete now waiting for ack u when the acknowledgement ‘able to comply’ is received, the specified channel (in step r) is selected with beeps automatically. Or, when the acknowledgemen...
29 6 dsc operation 6 r rotate [channel] to select “able to comply” or “unable to comply,” push [channel•enter]. • when “unable to comply” is selected, “no reason given” will be transmitted. --dsc menu-- select action ˘able to comply unable to comply --dsc menu-- individual ack ready t push [channel•...
30 6 dsc operation r rotate [channel] to select a desired intership channel, push [channel•enter]. • intership channels are already preset into the transceiver in recommended order. --dsc menu-- select intership ch ˘08 69 77 06 --dsc menu-- group call ready t push [channel•enter] to transmit the gro...
31 6 dsc operation 6 d transmitting an all ships call large ships use channel 70 as their ‘listening channel.’ when you want to announce a message to all ships within range, use the all ships call function. Q push [menu] to enter the dsc menu. W rotate [channel] to select “all ships call,” and push ...
32 6 dsc operation t after the all ships call has been transmitted, the following indication is displayed. --dsc menu-- all ships call tx complete y push [clr] to exit and the transceiver selects channel 16 automatically. • even if [clr] hasn’t been pushed, the transceiver automati- cally selects ch...
33 6 dsc operation 6 --dsc menu-- select address manual input john ˘paul george michael --dsc menu-- pos request ready r push [channel•enter] to transmit the position re- quest call. • if channel 70 is busy, the transceiver stands by until the chan- nel becomes clear. --dsc menu-- position request t...
34 6 dsc operation d transmitting a position report call transmit a position report call when you want to announce your own position to a specific ship and to get an answer, etc. Q push [menu] to enter the dsc menu. W rotate [channel] to select “position report,” push [channel•enter]. --dsc menu-- s...
35 6 dsc operation 6 --dsc menu-- input utc time __:__ null ˘null data> ˘exit / ent˘ok> --dsc menu-- position report ready y push [channel•enter] to transmit the position report call. • if channel 70 is busy, the transceiver stands by until the chan- nel becomes clear. --dsc menu-- position report t...
36 6 dsc operation d transmitting a polling request call transmit a polling request call when you want to know if a specific vessel is within communication range. Q push [menu] to enter the dsc menu. W rotate [channel] to select “polling request,” push [channel•enter]. --dsc menu-- select item indiv...
37 6 dsc operation 6 t after the polling request call has been transmitted, the fol- lowing indication is displayed. --dsc menu-- polling request tx complete now waiting for ack y push [clr] to return to the previous indication before en- tering the dsc menu. • even if [clr] hasn’t been pushed, the ...
38 6 dsc operation regardless of a gps receiver (nmea0183 ver. 2.0 or 3.01) connection, the current position/time information appears in steps r and t. If the information is not nec- essary to be changed, push [channel•enter] or [16•c] several times to skip the data input steps. R the position infor...
39 6 dsc operation 6 d transmitting a position report reply call transmit a position report reply call when a position report call is received. When the automatic acknowledgement function is on (p. 48), the transceiver automatically transmits a reply call after re- ceiving a position report. Q push ...
40 6 dsc operation d transmitting a polling request reply call transmit a polling reply call when a polling request call is re- ceived. When the automatic acknowledgement function is on (p. 48), the transceiver automatically transmits a reply call after re- ceiving a polling request call. Q push [me...
41 6 dsc operation 6 ■ receiving dsc calls d receiving a distress call while monitoring channel 70 and a distress call is received: ➥ the emergency alarm sounds for 2 minutes. • push [clr] to stop the alarm. ➥ “received distress” appears in the display, then channel 16 is automatically selected. ➥ c...
42 6 dsc operation d receiving an individual call while monitoring channel 70 and an individual call is re- ceived: ➥ the emergency alarm or beeps sound depending on the received category. ➥ “received individual” appears in the display. ➥ push [clr] to stop the beep, then push [channel• enter] to re...
43 6 dsc operation 6 25w int tag received all ships ˘ beep off> safety d receiving a geographical area call while monitoring channel 70 and a geographical area call (for the area you are in) is received: ➥ emergency alarm or beeps sound depending on the re- ceived category. ➥ “received geographic” a...
44 6 dsc operation d receiving a polling request call while monitoring channel 70 and a polling request call is received: ➥ “received poll req” appears in the display. ➥ push [clr] to stop the beep, then push [channel• enter] to reply to the call; push [clr] to ignore the call. 25w int tag received ...
45 6 dsc operation 6 ■ received messages the transceiver automatically stores up to 20 distress mes- sages and 20 other messages. The messages can be used as an assistance to the logbook. Q push [menu] to enter the dsc menu. W rotate [channel] to select “received calls,” push [channel•enter]. --dsc ...
46 6 dsc operation d other messages q r o t a t e [ c h a n n e l ] t o s e l e c t “ o t h e r ,” p u s h [channel•enter]. --dsc menu-- select message distress ˘other w rotate [channel] to scroll to the desired message, push [channel•enter]. • messages which are blinking have not been read. --dsc m...
47 6 dsc operation 6 ■ dsc set mode d mmsi code check (see page 16.) d add individual id/group id (see pages 17, 19.) d delete individual id/group id (see pages 18, 20.) d offset time this item sets the offset time from the utc (universal time coordinated) time. Q push [menu] to enter the dsc menu. ...
48 6 dsc operation d automatic acknowledgement this item sets the automatic acknowledgement function to on or off. When a position request, position report or polling request call is received, the transceiver automatically transmits a po- sition request reply, position report reply or polling reply ...
49 6 dsc operation 6 d nmea output select an nmea output function from off, all station or list station. When receiving position acknowledgment, the transceiver outputs it to the external equipment via the nmea connector. Q push [menu] to enter the dsc menu. W r o t a t e [ c h a n n e l ] t o s e l...
50 other functions 7 ■ intercom operation the optional intercom function allows you to talk to the deck from the cabin. The optional commandmic iii™ is required for intercom operation. Connect an optional command microphone as described on p. 63. • transmitting is impossible during intercom operatio...
51 7 other functions 7 • while in the intercom mode, the transceiver functions (transmit and receive) are interrupted. If the transceiver is in transmit condition, the intercom function is not available. • when a dsc call is received, the intercom function is interrupted with an automatic return to ...
52 7 other functions ■ hailer operation the ic-m505 has a hailer function for voice amplification over a loudspeaker, making it unnecessary to leave the bridge to talk a hailing party. Connect an external hailer speaker (25 w nominal at 13.8 v/4 Ω) as described on p. 58. • transmitting is not possib...
53 7 other functions 7 ■ automatic foghorn function the automatic foghorn function sounds a horn repeatedly until the function is turned off. Four patterns are available for varying conditions. The foghorn outputs from the hailer speaker. To use this function, the hailer speaker must be connected to...
54 7 other functions q while pushing and holding [h/l], push [hail•rx ] to enter auto foghorn mode. W rotate [channel] to select the desired foghorn pattern, push [channel•enter]. • ‘underway,’ ‘stop,’ ‘sail,’ ‘tow’ are available. (p. 53) • even if [channel•enter] hasn’t been pushed, the display aut...
55 8 set mode 7 8 ■ set mode programming set mode is used to change the conditions of the transceiv- er’s functions: scan type, scan resume timer, dual/tri-watch, beep tone, lcd contrast, automatic foghorn frequency, radio power, scrambler type* and scrambler code.* * appears only when the optional ...
56 8 set mode d dual/tri-watch this item can be selected as dualwatch or tri-watch. (p. 14) --set mode-- dual/tri tri-watch ˘dualwatch ˘ ok> default: dualwatch d beep tone you can select the silent operation by turning beep tones off or you can have confirmation beeps sound at the push of a key by t...
57 8 set mode 8 d radio power (appears when the hm-162e is connected) this item sets the radio power function on or off. On : the transceiver’s power is controlled by the optional command microphone. When the command micro- phone is turned off, the transceiver will also be turned off automatically. ...
58 connections and maintenance 9 ■ connections do not loose! O r t y i w q e u ferrite core* q nmea in lead (red) connects to a gps receiver for position indication. • a nmea0183 ver. 2.0 or 3.01 (sentence formatters rmc, gga, gns, gll and vtg) compatible gps receiver is required. Ask your dealer ab...
59 9 connections and maintenance 9 caution: after connecting the dc power cable, nmea in/out leads, external speaker lead and hailer/foghorn lead, cover the connector and leads with a rubber vulcan- izing tape as shown below, to prevent water seeping into the transceiver. ■ antenna a key element in ...
60 9 connections and maintenance ■ mounting the transceiver d using the supplied mounting bracket the universal mounting bracket supplied with your trans- ceiver allows overhead or dashboard mounting. • mount the transceiver securely with the 4 supplied screws (5 × 20 mm) to a surface which is more ...
61 9 connections and maintenance 9 ■ mb-75 installation an optional mb-75 flush mount kit is available for mounting the transceiver to a flat surface such as an instru- ment panel. Keep the transceiver and microphone at least 1 meter away from your vessel’s magnetic navigation compass. Q using the t...
62 9 connections and maintenance ■ ut-112/ut-98* installation caution: disconnect the dc power cable from the transceiver before performing any work on the trans- ceiver. Otherwise, there is danger of electric shock and/or equipment damage. * the ut-98 is the discontinued model, and the current mode...
63 9 connections and maintenance 9 r return the cables and screws to the original position. • be sure not upside down the flat cable. Caution: • when re-assembling the case and tightening the screws, you must keep the specified torque (0.5±0.07 n.M). Otherwise the transceiver may be damaged (torque ...
64 9 connections and maintenance q insert the supplied cable into the external microphone jack and tighten the cable nut as shown below. W to use the supplied cable as a wall socket, perform the following steps. E using the mounting base as a template, carefully mark the holes where the cable and th...
65 9 connections and maintenance 9 gasket mounting base cap nut 50 (d) mm; 1 31 Ú 32 ý 28 (d) mm; 1 3 Ú 32 ý 29.5 to 31.5 (d) mm (1 5 Ú 32 to 1 1 Ú 4 ý) 5 mm; 3 Ú 16 ý 2 mm; 3 Ú 32 ý.
66 troubleshooting 10 problem possible cause solution ref. The transceiver does not turn on. • bad connection to the power supply. • check the connection to the transceiver. P. 58 no sound comes from speaker. • squelch level is too high. • volume level is too low. • speaker has been exposed to water...
67 11 specifications and options 10 11 ■ specifications d general • frequency coverage : tx 156.000–161.450 mhz rx 156.000–163.425 mhz • mode : fm (16k0g3e), dsc (16k0g2b) • channel spacing : 25 khz • current drain (at 13.8 v) : tx high 5.5 a max. Max. Audio 1.5 a max. • power supply requirement : 1...
68 11 specifications and options d dimensions unit: mm 110 108. 4 165 145 31.4 91. 4 77 123. 2 ■ options • mb-75 flush mount kit for mounting the transceiver to a panel. • hm-162e commandmic iii ™ external microphone-type controller. Provides optional inter- com operation. 6 m microphone cable and m...
69 12 channel list 11 12 • international channels ch frequency (mhz) ch frequency (mhz) ch frequency (mhz) ch frequency (mhz) ch frequency (mhz) ch frequency (mhz) transmit receive transmit receive transmit receive transmit receive transmit receive transmit receive 01 156.050 160.650 11 156.550 156....
70 12 channel list • usa channels (for u.K. Version only) frequency (mhz) frequency (mhz) frequency (mhz) frequency (mhz) frequency (mhz) frequency (mhz) transmit receive transmit receive transmit receive transmit receive transmit receive transmit receive 156.050 156.050 156.600 156.600 157.100 157....
Hm-162e unit: mm 29.5 to 31.5 (d) 2 165 110 146 92.4 r12 (max.) mb-75 cut here 71 13 template.
Memo.
1-1-32 kamiminami, hirano-ku, osaka 547-0003, japan at fi it pl gb ro be fr lv pt is tr cy de lt sk li hr cz gr lu si no dk hu mt es ch ee ie nl se bg a-6484h-1eu-t printed in japan © 2006–2010 icom inc. Printed on recycled paper with soy ink..
When the lcom ma-500tr class b ais transponder is con- nected to your ic-m504/ic-m505/ic-m603/ic-m604 vhf marine transceiver , an individual dsc call can be transmitted to a selected ais target using the transponder, without needing to enter the target’s mmsi code. See the transponder’s manual for c...