Icom RS-RP2C Setup Instructions - ■ Ip Server Operation
10
2
SYSTEM SETUP
■ IP server operation
D
D Command operation
Sets the command input and output using with the
“FIFO” (/tmp/dsipsvd-cmdin, /tmp/dsipsvd-cmdout).
q Start up 2 Terminals, Terminal-1 and Terminal-2
with the following mouse operation.
w Enter the following command in the Terminal-1 to
make an output terminal of the “FIFO.”
#cat /tmp/dsipsvd-cmdout
Command
z Click
c Click
x Select
• Format
Mark
Description
Y
Y
Space
(ASCII code: 0x20)
|
Vertical line
(ASCII code: 0x7c)
[CS(T/A/Z)]
8-character call sign
(T: Target, A: Area repeater, Z: Zone repeater)
When the entered call sign does not fulfil 8-character, fill using a space.
(ASCII code: 0x20)
[DB]
Enter one of “GIP,” “RIP” or “MNG.”
(Capital letters only)
[GWIP]
Enter the global IP address of the gateway divided by full stop (.).
[TIP]
Enter the local IP address of the target server divided by full stop (.).
[HNAME]
Enter the target HOST name that is used for DNS.
Usable characters: A-Z, a-z, 0-9, _, /, [, ], +
[FNAME]
Enter the file name that is specified by the absolute path.