ICON Health & Fitness Weider WEEVBE13340 User Manual

Page of 8

Download

Print this page

Bookmark us

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this manual

for future reference.

Model No. WEEVBE13340

Serial No.

Write the serial number in the

space above for future reference.

Serial Number Decal

USER’S MANUAL

Part No. 217352 R0505A

QUESTIONS?

As a manufacturer, we are com-

mitted to providing complete

customer satisfaction. If you

have questions, or if there are

missing or damaged parts,

please call:

08457 089 009

Or write:

ICON Health & Fitness, Ltd.

Unit 4

Revie Road Industrial Estate

Revie Road

Beeston

Leeds

LS11 8JG

csuk@iconeurope.com

ORDERING REPLACEMENT PARTS

If you encounter any problems with this product, or if you need to order replacement parts, contact the ICON

Health & Fitness, Ltd. office, or write:

ICON Health & Fitness, Ltd.

Customer Service Department

Unit 4

Revie Road Industrial Estate

Revie Road

Beeston

Leeds

LS11 8JG

Tel:

Outside the UK: 0 (044) 113 387 7133

Fax: 0 (044) 113 387 7125

When ordering parts, please be prepared to give the following information:

• the MODEL NUMBER of the product (WEEVBE13340)

• the NAME of the product (WEIDER

INVERSION SYSTEM inversion table)

• the SERIAL NUMBER of the product (see the front cover of this manual)

• the KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST and the EXPLODED DRAWING on

pages 14 and 15)

08457 089 009

1 2 3 4 5 6 7 Next › »

Summary of Weider WEEVBE13340

Page 1
Caution read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. Model no. Weevbe13340 serial no. Write the serial number in the space above for future reference. Serial number decal user’s manual part no. 217352 r0505a printed in chi...
Page 2
Warning decal placement 10 10 11 12 32 17 14 19 16 14 19 31 3 48 47 58 28 28 4 14 14 19 19 13 42 23 38 20 44 45 44 45 36 36 20 34 40 6 18 18 8 41 33 25 40 46 40 21 8 35 33 41 25 40 34 9 40 40 46 27 30 24 29 2 1 5 22 36 36 41 41 33 33 7 41 33 41 33 35 7 15 26 37 39 43 49 50 51 52 54 53 56 55 53 40 40...
Page 3
14 note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover of this manual for information about ordering replacement parts. Key no. Qty. Description key no. Qty. Description 1 1 backrest frame 2 1 backrest 3 1 adjustment leg 4 1 foot plate ...
Page 4
4 warning: following is a list of factors and conditions that may make inverting inadvis- able (this list is not exhaustive; it is intended only for reference). If one or more factors or conditions apply to you, consult your physician before using the inversion table. • pregnancy • hiatal hernia or ...
Page 5
Note: the terms “right side” and “left side” are determined relative to a person using the inver- sion table; they do not correspond to right and left in the drawings in this manual. 5 adjustment leg adjustment cap pin backrest frame rear frame large knob foot plate right side left side backrest ank...
Page 6
6 before beginning assembly, carefully read the following information and instructions: • assembly requires two persons. • tighten all parts as you assemble them, unless instructed to do otherwise. • as you assemble the inversion table, make sure all parts are oriented as shown in the drawings. • pl...
Page 7
7 4. Insert the leg pad tube (13) into the indicated hole in the adjustment leg (3) and secure it with an m8 x 40mm bolt (48), an m8 zinc washer (47), and an m8 zinc nut (58). Slide two round foam pads (14) onto the ends of the leg pad tube (13). 5. Attach the lever pad tube (16) to the ankle lock (...
Page 8
8 7. Attach the strap (17) to the crossbar on the front frame (5). Attach the clip (32) on the strap to the hook on the bottom of the backrest frame (1). 6. Remove the pin (30) from the backrest frame (1). Pull the large knob (27) out as far as it will go. Next, insert the adjustment leg (3) into th...