ICON i-Controls Pro User manual - I-Pro Series Controllers
Daisy Chain with iControls Pro or any
i-Pro series Controllers
You may daisy chain i-Pro series controllers including iControls Pro. Because
most of the i-Pro series controllers are USB bus-powered (iControls Pro is
powered by an external power adapter) the stability depends on the total
power demand of the chain. Please visit our website for recommendations
on daisy chain sequences for different i-series controllers.
Connect the first of the i-Pro series controllers to your
Mac/PC via the USB port
Connect the next of the i-Pro series controllers
Select a USB port on your Mac/PC and insert the wide (flat) end of the USB
cable and the other small end (B-type USB pack) to i-Pro series controller.
Insert the wide (flat) end of the USB cable to the first i-Pro series
controller 's second USB port and the other small end (B-type USB jack) to
the second i-Pro series controller's USB port.
Note: Due to the limitation of power supply via USB port, your connected devices
chain might excess the power supply limit of the USB port and cause malfunction.
For recommendations on the combination and daisy chain sequence of different
i-Pro series controllers, please visit the ICON website at the following link:
www.icon-global.com
Contro ls
e1
Layer
e2
e3
e4
e5
e6
e7
e8
e9
1
2
3
4
f1
f2
f3
f4
f5
f6
f7
f8
f9
-
+
USB2.0 Cable
1
2
3
4
5
6
7
8
M
Zoom
1
2
3
4
Layer
Track
Bank
1
2
3
4
5
6
7
8
M
Solo
Mute
Sel
Solo
Mute
Sel
Solo
Mute
Sel
Solo
Mute
Sel
Solo
Mute
Sel
Solo
Mute
Sel
Solo
Mute
Sel
Solo
Mute
Sel
Solo
Mute
Sel