IConnectivity iConnectAudio 4+ Owner's Manual - page 34
v.1.0
34
For each MIDI port, this matrix is for filtering (removing from the datastream) any MIDI
controller on any of the 16 MIDI channels.
Filter Type (top left) selects whether to modify the input going to or the output coming
from each port.
Port is the familiar list of the16-channel MIDI ports available on the iConnectAUDIO4
+
:
the USB Device Jacks, USB Host Jack, and 5-pin DIN.
In the screen capture above, MIDI Continuous Controller 7 (Main Volume) data to USB
Device Jack 1 from the MIDI DIN port is being filtered from Channels 1-6 and 16.
The entire list of 127 MIDI controllers is available for filtering under the drop-down menu
in the Controller ID column.
MIDI Controller Data Remap
For each MIDI port, this matrix is for remapping (converting) any MIDI controller on any
of the 16 MIDI channels to a different one. The entire list of 127 MIDI controllers is
available as a Source and a Destination under the drop-down menu s.
Remap Type (top left) selects whether to modify the input going to or the output coming
from each port.
Port is the familiar list of the16-channel MIDI ports available on the iConnectAUDIO4
+
:
the USB Device Jacks, USB Host Jack, and 5-pin DIN.
In the screen capture above, MIDI Continuous Controller 7 (Main Volume) data to USB
Device Jack 1 from the MIDI DIN port is being converted to MIDI Continuous Controller
11 (Expression) – but only on MIDI channels 1 through 7.