IConnectivity iConnectAudio 4+ Owner's Manual - page 9
Manual is about: MIDI Interface
of
38
v.1.0
9
3. Bring up the Analog Outputs 1 & 2 fader (they’re linked for stereo). You should now
see three sets of stereo meters moving in the Audio Mixer. If you select Analog Outs
1&2 in Signal Level mode in the Interactive Display, the LED meters on the hardware
will match the onscreen ones.
Adding a second computer device
1. Simply connect the second computer device USB Device Jack 2.
If it’s a Windows computer, install the driver as per the Software instructions above.
With Mac OS X or Windows, select the iConnectAUDIO4
+
as the audio interface in your
audio software. There’s no software to install or configure in iOS devices.