Interlogix TVB-1101 Installation Manual - page 27
Other manuals for TVB-1101:
Installation Manual, Configuration Manual
Manual is about: TruVision 11/31 Series
of
36
Installation Guide
23
Note: If required, you can route cables through the side
opening of the mounting base.
4.
Loosen the tilt lock screws, and adjust the tilting position
in a range of 65 degrees. Retighten the tilt lock screws.
Rotate the dome liner to adjust the panning position in a
range of 360 degrees to obtain the desired surveillance
angle.
Adjust
screw