Interlogix TVB-1101 Installation Manual - page 28
Other manuals for TVB-1101:
Installation Manual, Configuration Manual
Manual is about: TruVision 11/31 Series
of
36
24 Installation
Guide
5.
Reinstall the lower dome and tighten the screws.
Mounting the wedge dome camera
To mount the wedge dome camera on a ceiling:
1.
Drill the screw holes on the ceiling with the supplied
drilling template. To route the cables from the base of the
camera, cut a cable hole in the ceiling.
2.
Fix the converter pan to the ceiling (optional).
Note: If required, you can remove the tabs (A) on the
side of the converter pan to pass the cables through.
3.
Loosen the set screws with a hex wrench (supplied) to
remove the dome enclosure.