Intermec 200 Quick Reference Manual - Field+ and Field-
CODE
CODE(".-
(".-NUG
NUG
3270 and 5250 Commands
4-9
4
Field+ and Field-
5250 terminal emulation only
The Field+ command operates as a Field Exit key in all fields.
The Field- command operation can vary depending on the system. With most
systems, the Field- command operates the same as the Field+ and Field Exit
commands except that you can only use it in signed numeric and numeric only
fields. Field- inserts a minus sign in the last position of a signed numeric field.
Keypad:
Field+
Field-
Scan:
Field +
*/EFLD/K*
*%FLD+*
Field -
*/EFLD/M*
*%FLD-*
Field Exit
5250 terminal emulation only
This command exits an input field and moves the cursor to the beginning of
the next input field. If you press this key while the cursor is between
characters, then all of the characters to the right of the cursor will be erased.
Field Exit works nearly the same as pressing Erase to End of Field followed by
a Tab, but some additional field processing may be done depending upon the
Field Formatted Word (FFW). See the IBM 5494 Remote Control Unit Functions
Reference Manual for a more detailed description of FFW.
Keypad:
=
Scan:
Field Exit
*/EFLDX*
*%FLDX*