Intermec 200 Quick Reference Manual - Before You Begin
D
Dnug
nug
>JI
>JIcode
code
Before You Begin
vii
Before You Begin
This section introduces you to standard warranty provisions, safety
precautions, warnings and cautions, document formatting conventions, and
sources of additional product information.
Warranty Information
To receive a copy of the standard warranty provision for this product, contact
your local Intermec sales organization. In the U.S. call 1-800-755-5505, and in
Canada call 1-800-688-7043. Otherwise, refer to the Worldwide Sales & Service
list that comes with this manual for the address and telephone number of your
Intermec sales organization.
About This Manual
This table summarizes the information in each chapter and appendix.
Chapter
What You Will Find
1
Provides basic information for setting up and using your JANUS data
collection computer with terminal emulation.
2
Describes the JANUS TE keypad and explains how to use terminal
functions on the keypad.
3
Tells you how to customize your JANUS terminal emulation
configuration.
4
Lists the terminal emulation commands you can use with your 3270 and
5250 terminals.
5
Lists the terminal emulation commands you can use with your VT/ANSI
terminals.
6
Provides information about error messages that you may encounter
while using terminal emulation software.
A
Provides a summary of available TE commands for all supported
devices. It also provides copies of the configuration files included on
your TE installation disk.
B
Provides information about VT/ANSI key support and instructions for
remapping keys on your JANUS device.