Intermec CK30 Installation Manual - page 4
6
7
You need a Phillips screwdriver to install the handstraps on the CK30s. Other
materials you may need include:
Ladder to reach the permanent mounting location for the WA22
Six mounting screws for the WA22 mounting bracket if you wish to use it. Type
and size of the screws depends on the materials at the installation location.
Drill and bit
Screwdriver for the bracket mounting screws
Three Ethernet cables (CAT5). The EasyADC System comes with three 3.05 m
(10 ft) Ethernet cables. You need to supply your own cables if you need longer
cable runs.
Before you begin installing your EasyADC System, you need these items:
Completed Great Plains questionnaire
Version number of your Great Plains software
Location of your Great Plains client’s dex.ini file (typically located at
C:/Program Files/Microsoft Business Solutions/Great Plains/dex.ini)
Name of and path to your Great Plains server
Name of your company database
SQL System Administrator password
Great Plains user ID and password
A range of at least five available IP addresses on your network
You also need to provide a dedicated PC to act as your EasyADC PC. Hardware
requirements for the PC are as follows:
Windows
®
XP Professional
2 GHz Pentium 4 or better
512MB RAM
500MB available hard drive space
CD-ROM drive
An available 100baseTx Ethernet port
An available USB port
Additionally, the EasyADC PC must:
be running a Microsoft Great Plains client.
be connected to your local area network.
have a static IP address.
EasyADC System Requirements
Tools and Additional Materials
EasyADC S
yst
em R
equirements