Intermec CK30 Quick Start Manual - Press 1 And Type
Oracle-Ready CK30 Handheld Computer Quick Start Guide
7
2
Press 1 and type
cr52401
at the Enter Password prompt.
3
From the Set-up Parms menu:
a
Press 1 for Communications.
b
Press 3 for Direct.
c
Press 2 for Host Setup.
d
Press 1 for Host A.
4
In the Host Name page, type the IP address of the Oracle
Server and press Enter.
5
In the Port Number page, type the port number that the
Oracle host will use. The port number you use should be
specified by the Network Administrator.
6
Press Enter until you return to the Main Menu.
7
Press 6 to exit the menus.
8
Press Y to save your parameters.
9
At the Enter Password prompt, type
cr52401
to return to
the TE 2000 application.
Troubleshooting
Use the next table to help troubleshoot some common problems
you may experience with the CK30.
Problem
Possible Solution
You press I to turn on the
CK30 and nothing happens.
The battery may be discharged.
Replace the battery with a spare
charged battery or charge the
battery and try again.
Make sure the contrast is not set all
the way to the darkest or lightest
setting. Press orange B and then
E repeatedly until you reach the
desired contrast level.
If you have a CK30 with a color
screen, make sure the backlight is
turn on. Press E.