1. DL manuals
  2. Intermec
  3. Scanner
  4. MaxiScan 3100
  5. Installation Manual

Intermec MaxiScan 3100 Installation Manual

Other manuals for MaxiScan 3100: User Manual, Installation Manual
Manual is about: Intermec MaxiScan 3010: User Guide

Summary of MaxiScan 3100

  • Page 1

    P/n 3-510049-01 maxiscan 3100 fixed station scanner installation guide.

  • Page 2

    2 maxiscan 3100 - installation guide - edition 1.1 regulatory statements intermec hereby declares that the maxiscan 3100 has been tested and found compliant with the below listed standards as required by the emc directive 89/336/eec as amended by 92/31/eec and by the low voltage directive 73/23/eec ...

  • Page 3

    Maxiscan 3100 - installation guide 3 laser warnings (maxiscan 3100 st / ml only) these warnings do not apply to the maxiscan 3100 sr which is a ccd scanner and does not contain a laser. English usa dhhs standard 21cfr 1040.10 and 1040.11: class iia laser product iec 825-1 (1993) en 60825-1 (1997): c...

  • Page 4

    4 maxiscan 3100 - installation guide.

  • Page 5

    Maxiscan 3100 - installation guide 5 contents 1 before you start.................................................................................................... 7 introduction .............................................................................. 7 integration considerations ...............

  • Page 6

    6 maxiscan 3100 - installation guide 7 maxiscan connexion system (option) ............................................................. 35 mcs connection box .............................................................. 35 scanner port ..................................................................

  • Page 7

    Maxiscan 3100 - installation guide 7 1 before you start introduction the maxiscan 3100 is a range of compact fixed bar code scanners that uses the latest patented technology and integrated design for fast and accurate scanning. The maxiscan 3100 offers a choice of intermec’s linear image (ccd) or la...

  • Page 8

    8 maxiscan 3100 - installation guide 1 before you start location and reading position tilt prevents reading of a bar code if all the bars are not inside the reading beam pitch • reduces bar width and is much more critical for high-density barcodes • reading may be possible with a pitch angle up to 7...

  • Page 9

    Maxiscan 3100 - installation guide 9 1 before you start skew • reduces bar height • reading may be possible with a skew angle up to 65° • reduce skew to increase reading efficiency • a small skew angle (2-3° minimum) is necessary to prevent specular reflection skew multi-line • good for reading dama...

  • Page 10

    10 maxiscan 3100 - installation guide 1 before you start reading moving bar codes which scanner ? Maxiscan 3100 st suitable for reading moving bar codes. Maxiscan 3100 ml suitable for reading moving bar codes. Good for damaged barcodes or picket fence reading of "floating" barcodes. Maxiscan 3100 sr...

  • Page 11

    Maxiscan 3100 - installation guide 11 1 before you start picket fence reading calculating pass-through speed if your application reads moving bar codes, the maxiscan 3100 st / ml must have time to read each bar code several times (5 scans is a good minimum). You can calculate the pass-through speed ...

  • Page 12

    12 maxiscan 3100 - installation guide 1 before you start.

  • Page 13

    Maxiscan 3100 - installation guide 13 2 installation mounting.

  • Page 14

    14 maxiscan 3100 - installation guide 2 installation adjustable raised stand (option) p/n 0-51029-05.

  • Page 15

    Maxiscan 3100 - installation guide 15 2 installation dimensions 7.5 cm (2.95") 6.5 cm (2.58") 5.6 cm (2.2") 3.6 cm (1.42") 4.8 cm (1.89") scale 1:2.

  • Page 16

    16 maxiscan 3100 - installation guide 2 installation.

  • Page 17

    Maxiscan 3100 - installation guide 17 3 connections maxiscan 3100 connector 15-pin subd female connector n i p n o i t c n u f 1 a t a d e v i e c e r 2 a t a d t i m s n a r t 3 d n e s o t r a e l c 4 d n e s o t t s e u q e r 5 ) + i s ( t u p n i n o i t a z i n o r h c n y s e v i t i s o p 6 )...

  • Page 18

    18 maxiscan 3100 - installation guide 3 connections rs-232 c connection with synchronization rs-232 c connection see the maxiscan connexion system section for the pinouts of the mcs connection box. Rs-232 c cable mcs/host p/n 0-530062-01 maxiscan 3100 power supply host system i/o synchronization dev...

  • Page 19

    Maxiscan 3100 - installation guide 19 3 connections rs-422 / rs-485 connection see the conversion cable section for the pinouts of the rs232 c to rs-422/485 con- version cable. Maxiscan 3100 conversion cable (rs-232 c to rs-422/485) p/n 3-510022-00 user cables to connect to user application host sys...

  • Page 20

    20 maxiscan 3100 - installation guide 3 connections.

  • Page 21

    Maxiscan 3100 - installation guide 21 4 input / output synchronization input synchronization reading can be triggered by an external device (opto-coupled cell, automatic ma- chine, electrical control device) connected to pins 5 and 6. The maxiscan 3100 can send a message to the host system when read...

  • Page 22

    22 maxiscan 3100 - installation guide 4 input / output synchronization example reading triggered by an opto-coupled cell. Current provided by the external input device must be limited to 20 ma (15 ma is a good average value). Pin 5 270 Ω pin 6 maxiscan 3100 photoelectric sensor pin 10 power in pin 1...

  • Page 23

    Maxiscan 3100 - installation guide 23 4 input / output synchronization output synchronization an external device (switch, alarm, indicator light) can be triggered by a good read or unsuccessful read by the maxiscan 3100. The external device is connected to pins 7 and 8. Output trigger good read the ...

  • Page 24

    24 maxiscan 3100 - installation guide 4 input / output synchronization.

  • Page 25

    Maxiscan 3100 - installation guide 25 5 setup there are 3 different ways to set up your maxiscan 3100 : • online setup with easyset • offline setup • online setup with commands easyset system configuration software is the easiest way to set up your maxiscan 3100. You can download your custom setting...

  • Page 26

    26 maxiscan 3100 - installation guide 5 setup online setup with easyset maxiscan power on ➌ connect rs-232 c cable (p/n : 0-530062-02) ➋ system power off ➊ system power on ➍ set the com port parameters to 19200 baud, 8 data bits, no parity ➐ scan easyset setup code ➎ refer to the easyset online help...

  • Page 27

    Maxiscan 3100 - installation guide 27 5 setup basic setup you can set up your maxiscan 3100 in a basic configuration by scanning configuration bar codes. Follow the instructions in this section. Basic setup does not include all the configuration possibilities of the maxiscan. For a complete setup, u...

  • Page 28

    28 maxiscan 3100 - installation guide 5 setup customize parameters (*) = default value (9600 baud, 7 data bits, even parity, 2 stop bits, postamble = cr + lf) 8 data bits postamble = none odd parity no parity 9600 baud (*) 7 data bits (*) even parity (*) 19200 baud postamble = carriage return postam...

  • Page 29

    Maxiscan 3100 - installation guide 29 5 setup disable all symbologies ➐ select symbologies upc-a, upc-e, ean-8, ean-13 (upc-a -> ean-13) upc-a, upc-e, ean-8, ean-13 (upc-a -> upc-a) code 39 code 128 / ean 128 test symbologies ➎ ➏ code 39 code 39 ean 13 1234567890128 code 128 code 128 upc-a 01234 500...

  • Page 30

    30 maxiscan 3100 - installation guide 5 setup.

  • Page 31

    Maxiscan 3100 - installation guide 31 6 slave mode you can control or configure your maxiscan 3100 directly from the terminal host system using slave mode. In this mode all the setup commands can be sent directly to the maxiscan 3100 through the rs-232 input port. The default slave mode is security ...

  • Page 32

    32 maxiscan 3100 - installation guide 6 slave mode 4. Send the setup commands from the host terminal to the maxiscan 3100. Note: the values displayed in “display data string mode” are hexadecimal values, make sure that the values you send from the host system correspond to these values. In our examp...

  • Page 33

    Maxiscan 3100 - installation guide 33 6 slave mode debug slave mode 1. Use the easyset "view - data string" command to obtain the data strings for the setup commands you want to send to the maxiscan 3100. Example: command "code 39 – active" = \41\4c\60 if you use "display data string mode" (see abov...

  • Page 34

    34 maxiscan 3100 - installation guide 6 slave mode.

  • Page 35

    Maxiscan 3100 - installation guide 35 7 maxiscan connexion system (option) scanner maxiscan connexion system power supply mcs connection box the maxiscan connexion system (mcs) can be used to connect the maxiscan 3100 to a host computer, power supply and synchronization device. The mcs box is an opt...

  • Page 36

    36 maxiscan 3100 - installation guide 7 maxiscan connection system scanner port 15-pin subd male connector rx tx cts rts si+ si- so+ so- 7-25 vdc pwr gnd 7-25 vdc chassis gnd 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 n i p n o i t c n u f 1 ) c 2 3 2 - s r ( a t a d e v i e c e r 2 ) c 2 3 2 - s r ( a t a...

  • Page 37

    Maxiscan 3100 - installation guide 37 7 maxiscan connection system power supply port 9-pin subd male connector n i p n o i t c n u f 1 ) d e t a l u g e r n u t t a w 5 . 2 c d v 5 2 o t 7 ( n i r e w o p 2 ) d e t a l u g e r n u t t a w 5 . 2 c d v 5 2 o t 7 ( n i r e w o p 3 d e t c e n n o c t o...

  • Page 38

    38 maxiscan 3100 - installation guide 7 maxiscan connection system host port (rs-232 c) 15-pin subd female connector rts cts tx rx gnd 8 7 6 5 4 3 2 1 15 14 13 12 11 10 9 n i p n o i t c n u f 1 ) c 2 3 2 - s r ( a t a d e v i e c e r 2 ) c 2 3 2 - s r ( a t a d t i m s n a r t 3 ) c 2 3 2 - s r ( d...

  • Page 39

    Maxiscan 3100 - installation guide 39 7 maxiscan connection system host port (current loop) mcs 15-pin subd female connector rx- rx+ tx- tx+ gnd 8 7 6 5 4 3 2 1 15 14 13 12 11 10 9 n i p n o i t c n u f 1 d e v r e s e r 2 c 2 3 2 - s r d e v r e s e r 3 c 2 3 2 - s r d e v r e s e r 4 c 2 3 2 - s r...

  • Page 40

    40 maxiscan 3100 - installation guide 7 maxiscan connection system synchros port 9-pin subd female connector in all cases, the synchronization current provided by the external input/output device must be limited to 20 ma maximum (15 ma is a good average value). 5 4 3 2 1 9 8 7 6 si- si+ so+ +5v so- ...

  • Page 41

    Maxiscan 3100 - installation guide 41 8 conversion cable (rs-232 c to rs-422 / 485) host side - 15-pin subd female connector n i p n o i t c n u f 1 ) 5 8 4 - s r ( - x t / - x r a t a d t i m s n a r t / e v i e c e r ) 2 2 4 - s r ( - x r a t a d e v i e c e r 2 ) 5 8 4 - s r ( - x t / - x r a t a...

  • Page 42

    42 maxiscan 3100 - installation guide 8 conversion cable (rs-232 c to rs-422/485) rs-422 host cable connector the user must provide the connection between the conversion cable and the host system. If this cable is long, install a resistor between pins 1 and 2. The resistor should have the characteri...

  • Page 43

    Maxiscan 3100 - installation guide 43 9 technical characteristics data (maxiscan 3100 sr) e c a f r e t n i e c a f r e t n i m e t s y s t s o h ) n o it a r u g if n o c d r a d n a t s ( c 2 3 2 - s r - ) 1 0 - 2 6 0 0 3 5 - 3 n / p e l b a c s e r i u q e r ( 2 2 4 - s r - ) 1 0 - 2 6 0 0 3 5 - ...

  • Page 44

    44 maxiscan 3100 - installation guide 9 technical characteristics l a t n e m n o r i v n e s n o i t a c i f i c e p s e r u t a r e p m e t g n i t a r e p o ) f ° 4 0 1 o t f ° 2 3 ( c ° 0 4 o t c ° 0 e r u t a r e p m e t e g a r o t s ) f ° 0 4 1 o t f ° 3 1 - ( c ° 0 6 o t c ° 5 2 - y t i d i ...

  • Page 45

    Maxiscan 3100 - installation guide 45 9 technical characteristics data (maxiscan 3100 st / ml) e c a f r e t n i e c a f r e t n i m e t s y s t s o h ) n o it a r u g if n o c d r a d n a t s ( c 2 3 2 - s r - ) 1 0 - 2 6 0 0 3 5 - 3 n / p e l b a c s e r i u q e r ( 2 2 4 - s r - ) 1 0 - 2 6 0 0 3...

  • Page 46

    46 maxiscan 3100 - installation guide 9 technical characteristics l a t n e m n o r i v n e s n o i t a c i f i c e p s e r u t a r e p m e t g n i t a r e p o ) f ° 4 0 1 o t f ° 2 3 ( c ° 0 4 o t c ° 0 e r u t a r e p m e t e g a r o t s ) f ° 0 4 1 o t f ° 3 1 - ( c ° 0 6 o t c ° 5 2 - y t i d i ...

  • Page 47

    Maxiscan 3100 - installation guide 47 9 technical characteristics reading distance (maxiscan 3100 sr) 11 10 9 8 7 6 5 4 3 2 1 0 4.3" 3.9" 3.5" 3.1" 2.8" 2.4" 2.0" 1.6" 1.2" 0.8" 0.4" 0" 7 6 5 4 3 2 1 0 1 2 3 4 5 6 7 2.8" 2.4" 2.0" 1.6" 1.2" 0.8" 0.4" 0" 0.4" 0.8" 1.2" 1.6" 2.0" 2.4" 2.8" scale 1:1 1...

  • Page 48

    48 maxiscan 3100 - installation guide 9 technical characteristics reading distance (maxiscan 3100 st / ml) 34 32 30 28 26 24 22 20 18 16 14 12 10 8 6 4 2 0 13.4" 12.6" 11.8" 11.0" 10.2" 9.4" 8.7" 7.9" 7.1" 6.3" 5.5" 4.7" 3.9" 3.1" 2.4" 1.6" 0.8" 0" 14 12 10 8 6 4 2 0 2 4 6 8 10 12 14 5.5" 4.7" 3.9" ...

  • Page 49

    Maxiscan 3100 - installation guide 49 9 technical characteristics accessories s e l b a c t s o h o t 0 0 1 3 n a c s i x a m t c e n n o c o t e l b a c " y " c 2 3 2 - s r n a c d n a t u p n i r e w o p r o f n o i t c e n n o c s e d u l c n i . C p r o m e t s y s t e s y s a e h t i w 0 0 1 3 ...

  • Page 50

    50 maxiscan 3100 - installation guide 9 technical characteristics.