Intermec USB Bluetooth Adapter Instructions Manual - page 11
USB Bluetooth Adapter Instructions
11
4
Double-click compose BT address.
5
Enter the Bluetooth address of your Bluetooth adapter and
click OK. The bar code appears on the setup sheet.
6
Scan the bar code onscreen with the SF51, or print the setup
sheet and scan the bar code.
The SF51 beeps once, the green status light flashes once, and
the blue Intermec Ready-to-Work indicator starts blinking.
The first time you connect, a message appears from the
Bluetooth icon on the taskbar requesting a Bluetooth PIN.
7
Click the message. The Bluetooth PIN Code Request box
appears.
8
In the Bluetooth PIN Code field, enter the default Bluetooth
PIN, which is 0000, and click OK.
A message appears from the Bluetooth icon on the taskbar
requesting Bluetooth authorization.
9
Click the message. The Bluetooth Service Authorization box
appears.
10
Select Always allow this device to access this service and
click OK.
When the SF51 connects to your host PC, it emits a series
of beeps from low to high, and the blue Intermec Ready-to-
Work indicator turns on and stays on.
To disconnect
• Scan this bar code:
Bluetooth Device Disconnect
\60\02\52\05\00\00\06\00\00\00\00\00\00\00\00\00
The SF51 disconnects from your host PC, emits a series of
beeps from high to low, and the blue Intermec Ready-to-
Work indicator turns off.