Intermec USB Bluetooth Adapter Instructions Manual - page 7
USB Bluetooth Adapter Instructions
7
4
Follow the onscreen instructions.
When you get to the passkey step, select Use the passkey
found in the documentation, and enter the default
Bluetooth PIN, which is 0000.
5
Click Next. The Bluetooth Device wizard verifies the passkey,
and then the final screen of the wizard appears.
6
Note the COM ports that are being used for incoming and
outgoing communication and click Finish.
Connecting Your SF51 to Your Host PC
There are two ways to create a Bluetooth connection:
• Connect from your SF51. Using this method, you can only
connect one SF51 to your host PC. When you place the SF51
in a charger, the SF51 is reset and the Bluetooth connection is
lost. After the SF51 is reset, it reconnects to your host PC.
• Connect from your host PC. Using this method, you can
connect more than one SF51 to your host PC.
Connecting From Your SF51
1
Start EasySet. Make sure that SF51 is selected as your
product.
2
From the EasySet commands window, select Data
transmission settings > Bluetooth parameters >
connect/disconnect.
3
Double-click compose BT address.
4
Enter the Bluetooth address of the adapter and click OK. The
bar code appears on the setup sheet.
5
Scan the bar code onscreen with the SF51, or print the setup
sheet and scan the bar code.
The SF51 beeps once, the green status light flashes once, and
the blue Intermec Ready-to-Work™ indicator starts blinking.
6
To verify your connection with EasySet, select
Communication > Connect. The Online Setup dialog box
appears.
7
Select the incoming COM port that you previously noted and
click OK.