J&M Corporation HS-BLU277EDR Series Owner's Manual - page 2
1. Product Description
J&M's #HS-BLU277EDR series are full-fidelity stereo Bluetooth wireless
helmet headsets, designed for installation into most open-face, flip-front
and full-face style helmets.
Superior audio fidelity has been achieved with our wide-fidelity
DynaPort®, non-ported and ultra-slim helmet speakers. (Proper acousti-
cal installation required)
This headset also provides the industry's best combination of wind and
ambient noise reduction with the AeroMike®III miniature boom micro-
phone.
Bluetooth control head unit features the CSR BluecoreV enhanced data
rate (EDR) Bluetooth module, for easy pairing to most Bluetooth enabled
audio devices available.
Our proprietary software package including the standard Bluetooth pro-
files of HSP, (Headset Profile) HFP, (Hands Free Profile), A2DP (Advanced
Audio Distribution Profile), AVRCP (Audio/Video Remote Control Profile)
along with the J&M Exclusive JMAHP (J&M Motorcycle Audio Headset
Profile) & JMDPI (J&M Driver/Passenger Intercom Profile) is the most
advanced Bluetooth software stack/package available anywhere.
Control head is powered by a rechargeable Lithium Ion/Polymer power
cell providing 9-13 hours of use from a full charge.
2. Safety and General Information
QDID: B014266
IMPORTANT INFORMATION OF SAFE AND EFFICIENT OPERATION.
READ THIS INFORMATION BEFORE USING YOUR DEVICE.
Users are not permitted to make changes or modify the device in any
way. Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment. See 47 CFR Sec. 15.21.
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. See 47 CFR
Sec. 15.19 (3).
ELECTROMAGNETIC INTERFERENCE/COMPATIBILITY
Note: Nearly every electronic device is suspectible to electromagnetic
interference (EMI) if inadequately shielded, designed or otherwise config-
ured for electromagnetic compatibility.
FACILITIES
To avoid electromagnetic interference and/or compatibility conflicts, turn
off your device in any facility where posted notices instruct you to do so.
Hospitals or health care facilities may be using equipment that is sensi-
tive to external RF energy.
AIRCRAFT
When instructed to do so, turn off your device when on board an aircraft.
Any use of a device must be in accordance with applicable regulations
per airline crew instructions.
MEDICAL DEVICES
HEARING AIDS
Some devices may interfere with some hearing aids. In the event of such
interference, you may want to consult with your hearing aid manufacturer
to discuss alternatives.
OTHER MEDICAL DEVICES
If you use any other personal medical device, consult the manufacturer
of the device to determine if it is adequately shielded from RF energy.
Your physician may be able to assist you in obtaining this information.
Industry Canada Notice to Users
Operation is subject to the following two conditions: (1) This device may
not cause interference and (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
FCC Notice to Users
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
3. Performance Features
•High Power Audio Output
•True Two Channel Stereo
•Integrated Rider-Passenger Wireless or Wired Intercom
•Separate Bluetooth and Intercom Volume Controls
•HSP (Headset Profile)
•HFP (Handsfree Profile)
•A2DP (Advanced Audio Distribution Profile ((Streaming Stereo))
•AVRCP (Audio Video Remote Control Profile)
•JMAHP (J&M Motorcycle Audio Headset Profile)
•JMDPI (J&M Driver Passenger Intercom Profile)
4. Package Contents
• HS-BLU277 Head Unit
• Lithium Ion/Polymer Power Cell
• AC Battery Charger
• Two Speakers
• Microphone
• Clamp Assembly
• Velcro
• Owner’s Manual
Product Description
Section 1
Safety & General Information
Section 2
Performance Features
Section 3
Package Contents
Section 4
Controls and Functions
Section 5
Installation Instructions For
Section 6A
Full Coverage & Flip Front
Style Helmets
Installation Instructions For
Section 6B
3/4 Style Helmets
General Operation Instructions
Section 7
Operation Instructions
Section 8
Table of Contents