J3 Competition kosmic Manual - page 10
J3 Competition Inc. – Kosmic Owner’s Knowledge Packet
10 |
P a g e
Axle Chart
Type
Size
Model
SOFT
HARDNESS
HARD
Code
E
50x1030
DD
0054.G0E
U
50x1030
DD
0054.G0U
Q
50x1030
DD
0054.G0Q
N
50x1030
DD
0054.G0N
H
50x1030
DD
0054.G0H
HH
50x1030
DD
0054.G0HH
U
50x1030
GB
0054.H0U
Q
50x1030
GB
0054.H0Q
N
50x1030
GB
0054.H0N
H
50x1030
GB
0054.H0H
HH
50x1030
GB
0054.H0HH
10. Tuning Bars (Front Torsion Bars)
Each chassis is supplied with a ‘Flat’ steel front torsion bar. This bar can be replaced
with three (3) additional round 30mm bars made of different wall thicknesses. The added
torsion bars come with a 1.0mm, 1.5mm, 2.0mm wall thickness. Each bar improves the
front-end effectiveness during changing track conditions. The 2.0mm is the stiffest,
which effectively allows the front-end to work better during high-grip levels; however, it
will require increased input and strength from the driver as well.
Many J3 Team Drivers prefer the 1.0mm bar
Part Numbers Provided in the Picture