Jabra BT5010 Multiuse User Manual - page 5
RELEASE YOUR JABRA
Jabra BT5010 Bluetooth headset
What your new headset can do
Your Jabra BT010 lets you do all this:
• Answer calls
• End calls
• Reject calls*
• Voice Dialling*
• Last number redialling*
• Call waiting*
• Put call on hold*
• Mute
• Enable/Disable vibrator
* Phone dependent
Specifications
• Talk time up to 10 hours/standby time up to 240 hours
• Rechargeable battery with charging option from AC power supply, PC
via USB cable or car charger (not included)
• Weight 20 grams
• Battery indicator
• Operating range up to 10 metres (approx. 33 feet)
• Headset and hands-free Bluetooth profiles
• Bluetooth specification
(see glossary) version 2.0
GETTING STARTED
The Jabra BT5010 is easy to operate. The answer/end button on the headset
performs the different functions depending on how long you press it.
Instruction:
Duration of press
Tap
Press briefly
Press
Approx: 1 second
Press and hold
Approx: 5 seconds
1. Charge your headset
Make sure that your Jabra BT5010 headset is fully charged for two hours
before you start using it. Use the AC adapter to charge from a power socket,
or charge directly from your PC with the USB cable provided. Use only the
chargers provided in the box – do not use chargers from any other devices
as this might damage your Jabra BT5010.
Connect your headset as shown in fig 2. When the LED indicator light is solid
red, your headset is charging. When the LED indicator light is green, it is fully
charged.
2. Turning your headset on and off
• Press the on/off/pairing button to turn on your headset (see fig 1).
The LED will show the battery status to indicate the Jabra BT5010 is on
(see section 7).
• Press the on/off/pairing button to turn off your headset until you see a
burst of flashes.
3. Pair it with your phone
Before you use your Jabra BT010, you need to pair it with your mobile
phone.
1. Put the headset in pairing mode
• Make sure the headset is off.
•
Press the on/off/pairing button marked until the LED indicator light is
solid blue.
Fig