Jabra EXTREME User Manual - English
5
english
Jabra EXTrEME
turnInG your headset on and off
- slide the on/off button forward on the side of the headset to
turn on the headset . The lEd will flash green for a second when
the headset is on .
- slide the on/off button backward to turn off the headset .
PaIrInG It WIth your Phone
headsets are connected to phones using a procedure called
‘pairing’ . by following a few simple steps, a phone can be paired
with a headset in a matter of minutes .
1. Put the headset in pairing mode
- When you turn on your Jabra EXTrEME for the first time, the
headset will automatically start up in pairing mode – i .e . it is
discoverable for your phone . When the headset is in pairing
mode the lEd is constantly lit blue .
2. Set your Bluetooth® phone to ‘discover’ the Jabra EXTREME
- follow your phone’s instruction guide . first make sure that
Bluetooth® is activated on your mobile phone . Then set your
phone to discover the headset . This usually involves going
to a ‘setup,’ ‘ connect’ or ‘Bluetooth®’ menu on your phone and
selecting the option to ‘discover’ or ‘add’ a Bluetooth® device .*
3. Your phone will find the Jabra EXTREME
- your phone will find the headset under name “Jabra EXTrEME” .
your phone then asks if you want to pair with the headset .
accept by pressing ‘yes’ or ‘ok’ on the phone and confirm with
the passkey or PIn = 0000 (4 zeros) . your phone will confirm
when pairing is complete .
EXTREME
EXTREME
EXTREME
In case of unsuccessful pairing, put the Jabra EXTrEME into pairing
mode manually . Make sure the headset is on . Press and hold the
answer/end button for approximately 5 seconds until the lEd has a
constant light . keep holding down the button until light is constant .