Jabra Stone2 User Manual - page 7
6
en
g
li
sh
Jabra Stone2
PAIRInG It WItH YoUR PHone
Headsets are connected to phones using a procedure called
‘pairing’ . by following a few simple steps, a phone can be paired
with a headset in a matter of seconds . Jabra Stone2 assists you
with this process via Voice Guidance .
1 Put the headset in pairing mode
1 .a First time pairing
- take the headset out of the portable charging unit . the
headset will automatically start up in pairing mode (showing
flashing blue light on the Jabra StatusDisplay
tM
) and start
searching for a device .
1 .b Pairing with another phone or re-pairing
- take headset out of the portable charging unit . turn the
headset off by long press on answer/end button . turn the
headset on again by long press on answer/end – keep pressing
until StatusDisplay
tM
shows flashing blue light .
2 Set yourBluetooth®phone to ‘discover’ the Jabra STONE2
- Follow your phone’s instruction guide . First make sure that
Bluetooth® is activated on your mobile phone . then set your
phone to discover the headset . this usually involves going
to a ‘setup,’ ‘connect’ or ‘Bluetooth®’ menu on your phone and
selecting the option to ‘discover’ or ‘add’ a Bluetooth® device .*
3 Your phone will find the Jabra STONE2
- the phone will find the headset under name “Jabra Stone2” .
- Your phone then asks if you want to pair with the headset .
- accept by pressing ‘Yes’ or ‘oK’ on the phone . If your phone
asks for passkey or PIn confirm with 0000 (4 zeros) . Your
phone will confirm when pairing is complete . Jabra Stone2
supports Bluetooth® version 2 .1 including Simple Secure Pairing
meaning that the headset can be paired with a phone or other
Bluetooth® device without using PIn or passkey but only if the
other Bluetooth® device supports Bluetooth® version 2 .1 also .
CONNECTIVITY
SELECT
MobilSurf
BLUETOOTH
Infrared port
Wap options
Synchronization
Networks
DEVICES FOUND
Jabra STONE2
Jabra STONE2
OK
Passkey:
****
HANDSFREE
SELECT
Jabra STONE2
added.
The handsfree is
now ready for use
SELECT
* refer to phone’s user manual