Jackson MSC JP-24B Service Manual - Installation Requirements

INSTALLATION REQUIREMENTS 

MODEL JP.24B/BF-ELECTRICAL REQUIREMENTS - SEE FIGURE - 1

IMPORTANT - PLEASE READ CAREFULLY - THE RINSE HEATER RELAY HAS BEEN TEMPORARILY 

DISABLED SO THAT THE MACHINE'S INTERNAL BOOSTER TANK CAN FILL WITH WATER BEFORE 

TURNING ON THE HEATING ELEMENT. A QUALIFIED SERVICEMAN MUST RECONNECT THE WIRE 

(ORANGE/WHITE) TO THE RINSE HEATER RELAY COIL (TAGGED) AFTER THREE CYCLES OF OPERATION 

AND THE WASH TANK IS FULL OF WATER. THE CIRCUIT BREAKER FEEDING THE UNIT SHOULD BE 

TURNED OFF BEFORE DOING THIS. 

DRAIN HOSE CONNECTION

Dishwasher has a pumped (pressure) drain capable of pumping waste water to a height of 24 inches from 

floor to the kitchen's drain system. The dishwasher is supplied with a 8-foot long drain hose that extends 

from the right rear side of machine. Drain hose must be installed indirect to kitchen's drain system with air 

gap. It protects the dishwasher against water backing up in it if a drain clogs.

6