Jacobsen Ransomes HR 6010 Service Course Manual - Section 6
6
SECTION 6
HYDRAULICS
Tools required:Standard automotive hand tools, including torque wrench, seal drivers, circlip pliers and
bearing driver.
Tachometer (Photo/Mechanical)
Obtain from local supplier or,
Graham and White Instruments
135 Hatfield Road
St. Albans
Herts.
AL1 4LZ
United Kingdom
Tel: 01727 841692
Part number
Description
A810957
Hydraulic Flow meter equipped with loading valve.
A808947
Fittings kit (7/8” JIC to assorted ORFS sizes)
A810938
Pressure Gauge test kit. 1 x 0-6000psi gauge, 1 x 0-600psi gauge, 2
x rubber covers for gauges and 1 x micro-bore connector hose.
A810954
0-600psi pressure gauge
A810955
0-6000psi pressure gauge
A810939
Micro-bore connector hose for pressure gauges
2695493
Flushing Filter. Flow capacity 230 ltrs/min, pressure capacity 6085psi
(414 Bar), filtration 10 micron and condition indicator gauge.
2695483
Replacement element for flushing filter
A810953
Belt tension tester
Cleaning Materials:
Stoddard or equivalent solvent
Detergent and water
Loctite “Locquic” Primer “T”
Lubricants:
See section 11
Other service items:
Seal and repair kits (available from Textron distributors)
Liquid gasket
Loctite 242 Blue
Hydraulic Servicing and Components
Hydraulic Schematics
1 - Steering to one side & lift levers in different positions
2 - All deck lowered and cutting
3 - Forward drive, transport speed
4 - Forward drive engage diff-loc
5 - Reverse drive