1. DL manuals
  2. Jade
  3. Grill
  4. JTRG Series
  5. Installation, Operation And Maintenance Instructions

Jade JTRG Series Installation, Operation And Maintenance Instructions

Summary of JTRG Series

  • Page 1

    P/n 24-127 rev a 7/00 page 1 jade rotating tortilla grill model: jtrg series installation, operation and maintenance instructions note: instructions must be posted in a prominent location, which will instruct the user in the event that he/she detects the odor of gas. This information shall be obtain...

  • Page 2

    P/n 24-127 rev a 7/00 page 2 retain this manual for future reference installation instructions important read these instructions carefully before starting the installation. Upon receipt of your equipment, thoroughly inspect it for any damage. If any damage is noted, immediately file a claim with the...

  • Page 3

    P/n 24-127 rev a 7/00 page 3 insert – general specifications diagram.

  • Page 4

    P/n 24-127 rev a 7/00 page 4 clearances and ventilation this appliance is design certified for installation in noncombustible locations only. Keep appliances area free and clear from combustibles. If the appliance is provided with adjustable feet and is connected to solid piping, it is essential to ...

  • Page 5

    P/n 24-127 rev a 7/00 page 5 model number, etc., is provided on this plate. Should the type of gas need change in the field, please inform the manufacturer at once. Experienced responsible service personnel only should convert the appliances from one type of gas to another type (natural/propane only...

  • Page 6

    P/n 24-127 rev a 7/00 page 6 2. Rotate the revolution control knob to the desired speed. The green light indicates power to the drive motor. Turn the revolution control knob slowly; rapid speed changes can result in unsafe conditions, blown fuses, or equipment damage. 3. Turn the burner knobs on and...

  • Page 7

    P/n 24-127 rev a 7/00 page 7 connector and the quick-disconnect device or its associated piping to limit the appliance movement. The connector or restraining device must always be installed when the appliance is in use. Should it become necessary to remove this device for cleaning are servicing the ...