Jadever JKD 250 User Manual
JADEVER SCALE CO., LTD
JDI SCALE
1
U s e r ’ s M a n u a l JD
1. Keypad
ZERO
key
:
Sets the display to zero. (Zero range is within 2% of maximum
capacity. Initial zero point range is within 20% of maximum capacity)
I
TARE
key
:
Tares the weight on the scale platform.
(Tare range is over 20d but
less than maximum capacity
)
GROSS/NET
key:
Toggles between gross and net weight.
Sleep/Wake
key
:
Toggles between standby mode and working mode.
I/O key: Power on or off the scale
Note:
◎
G.W.
=Gross weight
◎
N.T.
Net weight = gross weight minus tare.
◎
J
DI-800 can only use the OUTPUT DC 6V /2.5A adaptor. Battery is optional.
◎Please check the power source if there is sudden power failure.
2. Weighing Menu
M+:
Adds the indicated weight into Accumulation memory.
Note:
◎Only if the weight is over 20d, can it be accumulated.
◎ Remove the item and the display goes back to zero before the next
accumulation can register.
PRINT:
Outputs data.
print modes: manual print /Stable print
Note: Turn off the printer before connect to the scale.
MC:
clears previous accumulation data.
Return:
Returns to previous menu.
3. COUNT Menu
MR:
Adds the indicated weight and piece count value into Accumulation
memory.
UW Lookup:
Recalls unit weight from memory.
Note: If there is no weight value or unit weight value, the UW Lookup is not
available.
Store UW:
Stores Unit weight into memory.