Jadever JKD 250 User Manual - page 6
JADEVER SCALE CO., LTD
JDI SCALE
6
labeling standard for GS1 used as product identification for container and pallet levels in the
supply chain.
•
128A (Code Set A) - ASCII characters 00 to 95 (0-9, A-Z and control codes), special
characters, and FNC 1-4
•
128B (Code Set B) - ASCII characters 32 to 127 (0-9, A-Z, a-z), special characters,
and FNC 1-4
•
128C (Code Set C) - 00-99 (encodes each two digits with one code) and FNC1
Universal Product Code (UPC)
: a barcode symbology, which is widely used in
Canada and the United States for tracking trade items in stores. The UPC has only numerals,
with no letters or other characters. UPC in its most common usage technically refers to
UPC-A which encodes 12 decimal digits. UPC-E only uses a 6-digit code, does not use
middle guard bars on smaller packages.
EAN-13:
Four components :
•
The GS1 Prefix, the first two or three digits, usually identifying the national GS1
Member Organization to which the manufacturer is registered (not necessarily where
the product is actually made).
•
The Company number, consisting of four, five or six digits
•
The Item reference, consisting of two to six digits
•
Check digit, a single checksum digit
EAN-8
: It was introduced for use on small packages where an EAN-13 barcode would be
too large. It begins with a 2 or 3 digit GS1 prefix (which is assigned to each national GS1
authority) 5 or 4-digit item reference element depending on the length of the GS1 prefix), and
a checksum digit.