1. DL manuals
  2. Jadever
  3. Scales
  4. JWE
  5. User Manual

Jadever JWE User Manual

Other manuals for JWE: User Manual, Service Manual
Manual is about: High Precision Check Weigher and Bench Scale

Summary of JWE

  • Page 1

    Jwe 0 table of contents 1. Introduction ………………………………….…………………………………………. 1 2. Precautions …………………………………….……………………………………….. 1 3. Before using the product 3-1 unpacking and checking………………………………………………………………….. 3-2 installing components ………………………………………..…………………………… 3-3 leveling the scale……………………………………………...

  • Page 2

    Jwe 1 1. Introduction thank you for deciding to purchase a jwe weighing scale from jadever. This goods has the excellent performance and splendid properties under severe quality management .It is recommended to read this manual in full before using it for good function application. 2. Precautions ◎ ...

  • Page 3

    Jwe 2 4. Product introduction 1) stainless steel weighing pan 2) plastic weighing pan 3) delivery protection screw 4) power socket 5) on/off switch 6) hi-lo-ok signal output and bilateral rs-232 standard interface 7) print button 8) two-stage switch 9) bubble level indicator 4-1 specifications & gen...

  • Page 4

    Jwe 3 general features ‧3kg/0,1g~30kg/1g ‧1/30,000 display resolution ‧water-resistant durable keypad ‧ auto power off / auto backlight ‧hi/lo/ok setting can be stored ‧hi/lo/ok alarm function ‧soft-ware filtering ‧stainless steel weighing pan is for long-term operation ‧operated by power supply or ...

  • Page 5

    Jwe 4 4-2-2 keyboard 1) m+/mr key memory /memory recall 2) mc/set key enables weight checking function /clear previous accumulation data 3) mode key cycles through kg, g, lb, lb-oz,斤, 台斤, 港斤,pcs and %（ enable 斤、台 斤 and 港斤 under the setting mode if needed .） 4) tare key tares the weight of the pan / ...

  • Page 6

    Jwe 5 5-2 tare when weighing a sample that must be held in a container, tare stores the container weight into memory. Tare 1) under the weighing mode, place the container on the weighing pan, wait till stable indicator appears, and press the key tare . The container is tared. → 2) place the item(s) ...

  • Page 7: 5-5 Percentage Weighing

    Jwe 6 5-4 simple counting 1) under the weighing mode, press key mode to select the unit “pcs” 2) press key mc/set to choose the sampling amount (options are 25, 50 and 100), then put the simples on the weighing pan. 3) wait till the appearance of cal 4) two seconds later, the sampling action ends up...

  • Page 8: Accumulation Display

    Jwe 7 accumulation display press key m+mr to display total accumulation data (number of weighments & total weight) and back to weighing mode. → → accumulation clearing to clear accumulation data, press key mc/set while the total weight is displayed. The accumulation lamp goes off when the accumulati...

  • Page 9

    Jwe 8 2) press key mode to enter the zero point calibration mode. 3) wait till appears, put weights of 1/3 of full load on the weighing pan and press down key tare e.G., for jwe-3k ,1/3 of full load is 1kg. 4) wait till appears, and then put weights of 2/3 of full load on pan and press down key tare...

  • Page 10: 8. Serial Interface

    Jwe 9 4) set the filtering level in which the stable indication turns on .The higher the setting, the slower stabilization time. Options are fil 1,fil 2,fil 4 and fil 8. 5) set the period of inactivity before the scale automatically turns off. Options are aut.No=non power-off,aut.5, aut.10, aut.30 a...

  • Page 11

    Jwe 10 8-1 rs-232 connector 8-2 single option 1) rs232+rtc+relay+ tdp / sh-24（tp）/ zebra / godex（ez)printer 2) rs232+rtc+relay+ led light tower (applicable to the quality control of the factory product quantity or weight and that of the total production line.) 3) rs232+rtc+relay+computer 8-3 rs-232 ...

  • Page 12

    Jwe 11 example: t.W.: + 1.000 kg n.W.: + 1.000 kg g.W.: + 2.000 kg 2、g g/n/ t . W . ： +/- g cr lf weight example： t.W. : + 0.0 g n.W. : + 1000.0 g g.W. : + 1000.0 g 3、lb g/n/ t . W . ： +/- l b cr lf weight example: t.W. : + 2.2050 lb n.W.: + 2.2050 lb g.W.: + 4.4100 lb 4.台斤 g/n/ t . W . ： +/- - g - ...

  • Page 13

    Jwe 12 example： t.W. : + 1-10.5g-tl.H n.W. : + 1-10.5g-tl.H g.W. : + 3- 4.9g-tl.H 6、斤 g/n/ t . W . ： +/- c - j i n cr lf weight example: t.W. : + 2.0000 c-jing n.W. : + 1.9998 c-jing g.W. : + 3.9998 c-jing 7、lb/oz g/n/ t . W . ： +/- l b cr lf weight example： t.W.: + 0- lb 0.000 oz n.W.: + 2- lb 3.28...

  • Page 14

    Jwe 13 9. % +/- % c lf % example： + 24% g = gross n = net 9. Troubleshooting and error message error messageproblems solutions initial zero point exceeds ＋ /-30% (take 10% as reference basis) 1. Check whether there are other alien articles on the scale pan, remove those articles. 2. Load cell failur...

  • Page 15

    Jwe 14.

  • Page 16

    Jwe 15.