Jadever JWE User Manual - page 6
JWE
5
5-2 Tare
When weighing a sample that must be held in a container, tare stores the container weight
into memory.
Tare
1) Under the weighing mode, place the container on the weighing pan, wait till stable indicator
appears, and press the key
TARE
. The container is tared.
→
2) Place the item(s) to be weighed into the container. The weight displayed is the net
weight.
.
3) Remove all items from the weighing pan; the screen displays the tare value.
4) To clear tare with an empty pan, Press down the key
TARE
(after the appearance of
“ZERO”) or key
ZERO+.
5-3 Weight Checking
1)
Under the weighing mode, press key
MC/SET
to enable the weight checking function.
2) Begin by pressing the key
MODE
. The value of upper limit will display first, with the
left-most digit blinking.
3) To change the upper limit, Press key
ZERO+
to increment the flashing digit and the key
TARE
to shift to the next digit.
4) Advance to the lower limit setting by pressing key
MODE
with the left-most digit
blinking.
.Repeat the procedure above to set the lower limit.
5) When the lower limit has been set, press key
MODE
to store the settings and begin
weight checking.
6) Press key
M+/MR
to cancel Weight Checking and return to weighing mode.