Jadever JWI 700C Instruction Manual - page 13
JWI-700C
12
7-1-3 Unit Switch Operation
1) Press key
SMPL
while powering on the scale.
2) Key in 1132 via numeric keys.
3) Again press key
SMPL
to enter unit selection
mode. Numeric key
1
is to toggle between kg
and Lb units.
4) Press key
SMPL
to save, and then press key
ZERO
to return to the weighing mode.
7-2 Basic Counting
7-2-1 Upper & Lower Quantity Limit Checking
1) Under the weighing mode, press and
hold key
MC/CK
to initial upper/lower limits
setting. (“
” is blinking.)
2) Use numeric keys to set the upper/lower
Limits. Key
● is to save upper limit value
and advance to the lower limit setting.
3) When setting is completed, again press key
MC/CK
to return to weighing and checking
mode.
4)To cancel checking action , long press key
MC/CK
, then press key
“·”
twice .Checking
action is cancelled, with “
”displays momentarily before the screen go back to zero mode.
7-2-2 Entering a Known Unit Weight
1) Under the weighing mode, use the numeric
keys together with key
“·”
to input unit weight
value, and then press
UWS
.
2)Put the article on the weighing pan , the
scale starts counting.