JAGER PRO M.I.N.E. Operation Manual - page 20
20
Ensure the camera PIR triggers and sends a photo to your cell phone. This
step will verify the camera is positioned and programmed correctly. Ensure
the feeder is centered and the entire gate opening is visible.
From left to right- JAGER PRO is the camera manufacturer. The “M”
indicates the photo was triggered by “Motion”. The letter “S” would indicate
a photo triggered by SMS code
*500#. “P” would indicate a photo triggered
by “Time Lapse” and “E” would indicate a manually triggered photo using the
camera’s
OK select button during SETUP.
The date is 26 JUNE 2014. The time is 2024 or 8:24 in the evening. It is a
new moon with 29 more nights until the next new moon. The temperature
is 81 degrees Fahrenheit. The battery symbol is “H” which indicates the
batteries are at a high charge.
The final step is to register your new equipment on the JAGER PRO website
via the camera IMEI number so we may provide appropriate firmware
updates. These updates are necessary to ensure your equipment operates
efficiently as network wireless technology changes. Multiple cameras
and control boxes may be registered on a single submission by following
directions in your Quick Start Guide.
If you have any questions, refer to the
JAGER PRO™ M.I.N.E. & I.C.E. (3G)
Camera Operations Video at 20:08 CAMERA DEPLOYMENT for more
information.