James 9050 Touch User Manual - Common Cleaning Methods
9
Selection of container: (Adding a container to the tank will reduce the cleaning effect by the following)
Container Type:
Plastic
Aluminium
Glass
Stainless Steel
Ultrasonic energy absorption: 30-40% 20% 15% 8%
Put the items in a separate container. Use ultrasonic waves
to penetrate the container to do the cleaning.
Suitable Locations: medical instrument sterilization rooms,
watch and precision parts manufacturers, mobile phone
and electronics service shops, large printing shops.
Different industries use different fluids inside the container:
1. Watch service shops - Watch oil (to prevent rust)
2. Medical instrument sterilization - Enzymatic solution
(cleaning prior to sterilization)
3. Precision electrical parts - Hexane (to dissolve grease, to
evaporate quickly)
4. Mobile phone and electronic service shops - Pure alcohol
(to evaporate quickly).
5. Printing shops – Acetone is often used (to dissolve ink)
Cleaning Method:
1. Put the item inside a container. Add proper fluid to submerge the area to be cleaned.
2. Place the container in the tank directly. Add water to a level between “MIN” and “MAX”, do not overflow.
3. Turn the power switch on. Press Time button to set the timer to 10 minutes. Press On/Off button to start
cleaning. Ultrasonic waves will penetrate the container and clean the items.
10
INDIRECT CLEANING
Avoid any acetone, acid, alcohol, amonia or solvents from contacting the plastic housing and control
panel to prevent corrosion. Use Indirect Cleaning and a glass or metal container for using such solutions.
COMMON CLEANING METHODS
Only tap water is needed.
Suitable Locations:
Jewellery makers, biology / chemical labs, homes, speech
therapy clinics, dental clinics, automotive repair shops.
Cleaning Method:
1. Put the items to be cleaned inside the basket and put the
basket inside the tank.
2. Add water to the cleaning tank to a level between
“MIN” and “MAX” lines and above the area to be cleaned.
3. Turn the power switch on. Press Time button to set the
timer to 5 - 10 minutes. Press On/Off button to start cleaning.
Notes on using the basket:
1. The basket reduces the friction between the items and the tank. Stainless steel tray absorbs
approximately 8% of ultrasonic energy and a plastic basket absorbs about 35% of ultrasonic energy.
This significantly reduces the cleaning effectiveness.
2. During cleaning, dirt will come off like smoke and the water will become murky over time.
When “smoke” stops coming, the cleaning is basically done.
REGULAR CLEANING