Jands HP12 Technical Manual - page 2
Equipment Description
ii
Revision 2 - 26 April, 2000
HP SERIES DIMMER
TECHNICAL MANUAL
JANDS ELECTRONICS PTY LTD 1997
All rights reserved
DISCLAIMER
Information contained in this manual is subject to change without notice and does not
represent a commitment on the part of the vendor. JANDS ELECTRONICS P/L shall
not be liable for any loss or damage whatsoever arising from the use of information or
any error contained in this manual.
It is recommended that all service and repairs on this product be carried out by JANDS
ELECTRONICS P/L or it’s authorised service agents.
JANDS HP Series dimmers must only be used for the purpose they were intended by
the manufacturer and in conjunction with the operating manual.
JANDS ELECTRONICS P/L cannot accept any liability whatsoever for any loss or
damage caused by service, maintenance or repair by unauthorised personnel, or by use
other than that intended by the manufacturer.
Manufactured in Australia by:
JANDS ELECTRONICS PTY LTD
ACN 001 187 837
40 KENT Rd
Locked Bag 15
MASCOT
NSW 2020
AUSTRALIA
PHONE:
+61-2-9582-0909
FAX:
+61-2-9582-0999
EMAIL:
Internet:
jandsinfo@jands.com.au