Jandy FHPM Installation And Operation Manual - page 16
Zodiac Pool Systems, Inc.
2620 Commerce Way, Vista, CA 92081
1.800.822.7933 | www.ZodiacPoolSystems.com
©2014 Zodiac Pool Systems, Inc. ZODIAC
®
is a registered trademark of Zodiac International,
S.A.S.U., used under license. All trademarks referenced herein are the property of their respective
owners.
H0315300 Rev K
6 ¾"
10 ⅞"
NOTE See Table 4, column 7
for the value of 'A'.
Bolt Holes, Center to Center
Front Edge of Union, to Center of Bolt
NOTE When installing the
pump, leave a minimum
of two feet (2 ft) of
clearance above the
pump for removal of
the strainer basket.
7 ¾"
12 ¾"
10"
7 ¾"
'A'
11 ⅛"
Figure 6. FHP Pump Dimensions (without Base or Spacers)
CONFORMSTOUL1081
CERTIFIEDTOCSAC22.2NO108
7.4 Physical and Operational Specifications
7.4.1 Specifications
Table 4. FHPM Pump Specifications
Model No.
HP
Voltage
Amps
Pipe Size
Carton Weight
Overall Length 'A'
FHPM .75
0.75
230/115
5.4/10.8
1½-2"
40.6
25 3/16"
FHPM1.0
1.00
230/115
7.1/14.2
2-2½"
41.2
25 3/16"
FHPM 1.5
1.50
230/115
8.0/16
2-2½"
42.6
25 ½"
FHPM2.0
2.00
230/115
11.2/22.4
2-2½"
54.6
27 3/16"
FHPM 2.5
2.50
230
11.5
2½-3"
48.6
26 3/16"
FHPM1.0-2SPD
1.00
230
6.0/2.3
2½-3"
46.5
26 5/16"
FHPM 1.5-2SPD
1.50
230
7.2/3.0
2½-3"
48.0
26 9/16"
FHPM2.0-2SPD
2.00
230
10.0/3.5
2½-3"
52.9
27 11/16"
7.4.2 Dimensions
Table 1 shows the height of the FHP pump in the four (4) mounting configurations listed below. Figure 3 on page 8
shows drawings of these four (4) configurations.