Javad TRIUMPH-LS Quick Start Manual - page 22
www.javad.com
www.javad.com
43
42
Collect
Collect
which opens a screen to configure the collection settings
for points. The RTK Verification and Validation settings are
configured from Action Setup screen.
Collect Prepare Screen
Pressing the Action hardware button or Next
from the Collect Prepare screen opens the
Collect Action screen.
Collect
Pressing the Collect button
opens the Collect Prepare
screen; pressing Collect
hardware button twice
will open the Collect Action
screen.
In the Collect Prepare screen, the Project, Page, Coordinate
System, ShapeTag, Code, Code Attributes, Point Name, Point
Description, Antenna Height and collection settings can be
setup before beginning data collection for a point.
When collecting points, it is recommended to use the
Code and Code Attributes to store information about the
point being collected. The Description field can then be
reserved for entering additional information about the
point. When exporting point coordinates in Text/CSV
format, these three fields can be merged into one field so
that surveying software can import data with the traditional
“Name,N,E,H,Description” format but with the description
being the combination of J-Field’s Code, Code Attributes and
Point Descriptions fields.
The Review buttons opens the Review screen which is a map
of the project. Here linework can be drawn on the map with
the CAD functions and point data can be edited.
The View button opens a screen to configure what point
attributes are displayed on the map and allows some
graphical parameters to be customized.
To the right of the View button is the Action Setup button
Screen Anatomy - Collect Prepare Screen
The Review buttons opens the Review
screen which is a map of the project.
Here linework can be drawn on the map
with the CAD functions and point data
can be edited.
The View button opens a
screen to configure what point
attributes are displayed on the
map and allows some graphical
parameters to be customized.
The Project button displays the name
of the current Project. Tap it to open
an existing Project, to create a new
Project, or to edit the current Project’s
name or coordinate system.
The Page button displays the name of
the current Page. Tap it to open the
Pages screen and set the current Page,
turn on or off Pages or edit a Page
Name or coordinate system.
The Coordinate System button displays
the name of the coordinate system for
the current Page. Tap it to change this
coordinate system.
The Code button displays the name of
the Code that will be assigned to the
next surveyed point. Tap it to choose
a new Code from your list of Favorite
Codes.
Up to five variable Code Attributes
fields can be used be used to store
additional information about a point
with this box.
ShapeTags can be assigned to points
during data collection to enable the
automated drawing of lines between
points with like ShapeTags. “DefTag”
is the default ShapeTag and does not
create lines between points.
Edit the height of the ARP (Antenna
Reference Point).
Takes you to the Action screen
The Point Name button displays the
name that will be assigned to the
next surveyed point. After a point is
surveyed it will increment to the next
available name.
Displays the estimated remaining
battery life and is a shortcut to
the Battery Status screen
Displays the current Action Group pro-
file namegroup and opens the Action
Setup screen. The rover icon displays
whether tilt corrections are enabled
or not (disabled above). The clock icon
indicates the How to Stop? setting has
been set to a fixed number of epochs.
Use the Point Description field to store
additional information about the point.