- DL manuals
- JAYLINE
- Stove
- WALLTHERM AIR
- Installation & Operation Instructions
JAYLINE WALLTHERM AIR Installation & Operation Instructions
Summary of WALLTHERM AIR
Page 1
Walltherm air® freestanding wood fire installation & operation instructions october 2014 november 2016 please leave this information with the appliance.
Page 2
Page 2 www.Jayline.Co.Nz november 2016 product registration to activate your 15 year guarantee, please complete and return within 30 days of installation to: retail links ltd po box 9056 annesbrook, 7044 nelson name: ________________________________________________________________________ address: _...
Page 3
Page 3 www.Jayline.Co.Nz november 2016 congratulations on the purchase of your walltherm air® ultra low emission burner, by jayline. The walltherm air® ultra low emission burner is not a conventional wood fi re, it is a ‘wood gasifi cation stove’, developed for the optimal burning of air dried natural...
Page 4
Page 4 www.Jayline.Co.Nz november 2016 items supplied with the fi re • installation / owners manual • cleaning brushes • fire hook • stainless steel shovel • moisture meter handling and transport the fi re is delivered complete with all the parts specifi ed. Pay attention to the fi re’s tendency to shif...
Page 5
Page 5 www.Jayline.Co.Nz november 2016 6. Locate the heater in the required position (also see ‘fitting seismic restraint’ after installation instruction #10). 7. Using a plumb line fastened to the ceiling, mark the centre of the fl ue penetration position and cut the ceiling hole to the required siz...
Page 6
Page 6 www.Jayline.Co.Nz november 2016 combustion air there are 3 methods of obtaining combustion air for this product. 1. Drawing the combustion air from the room. Approved for all installations including canterbury method 1 (cm1). Adequate ventilation is required to prevent a negative pressure sit...
Page 7
Page 7 www.Jayline.Co.Nz november 2016 electrical connection – fig 3 the electrical connections and components for the convection fan are already installed; the electrician must ensure the electrical connection for the fan is permanently connected, earthed and fi tted with an isolating switch. The el...
Page 8
Page 8 www.Jayline.Co.Nz november 2016 warnings 1. Warning: the heater and flue system shall be installed in accordance with as/nzs 2918:2001 and the appropriate requirements of the relevant building code or codes. 2. Warning: appliances installed in accordance with this standard shall comply with t...
Page 9
Page 9 www.Jayline.Co.Nz november 2016 correct operation of your walltherm air® wood fire simply by burning your walltherm air® fi re correctly, you can improve effi ciency, reduce fuel consumption and minimise air pollution. Starting a new fire please note: if lighting the fi re for the fi rst time, du...
Page 10
Page 10 www.Jayline.Co.Nz november 2016 lighting instructions – figs 4 • firstly, make sure the bypass valve is set to ‘start’ (fig 4a) • turn the fan isolating switch on • check there is nothing obstructing the grate (clean) and the lower chamber is clean • close the lower door • load several small...
Page 11
Page 11 www.Jayline.Co.Nz november 2016 • once the above wood is fully alight, add 4 of the 625g pieces of wood (fig 4c.), by fi rstly switching the bypass valve to start (fig 4a), slowly opening the door, adding the wood front to back, as shown in (fig 4c) closing the door and switching the bypass v...
Page 12
Page 12 www.Jayline.Co.Nz november 2016 purchasing the firewood the quality of the fi rewood you burn can have a dramatic effect on the effi ciency and operation of the heater. The main factors that affect the burning characteristics of fi rewood are moisture content, tree species and piece size. The m...
Page 13
Page 13 www.Jayline.Co.Nz november 2016 walltherm air® wood fire cleaning the fi re requires frequent and thorough cleaning as well as periodical inspection to guarantee it will work properly and ensure constant heat effi ciency. When cold use a vacuum cleaner to remove all the ash that has collected ...
Page 14
Page 14 www.Jayline.Co.Nz november 2016 to prevent the glass from the upper combustion chamber becoming black, you need to clean the air inlet which is behind the upper door (stainless steel grill, see pictures below) also clean the gap in between the door and the refractory stones in the lower comb...
Page 15
Page 15 www.Jayline.Co.Nz november 2016 monthly cleaning – fig 7 the heat exchanger tubes should be cleaned every 6 – 8 weeks. For cleaning the tubes, please use the two brushes supplied with the fi re. Cleaning the heat exchanger tubes – figs 8 to clean the tubes, remove the top cover behind the fl u...
Page 16
Page 16 www.Jayline.Co.Nz november 2016 after cleaning the lower combustion chamber carefully set the grid back into the correct position. Please make sure the injector block is clean, otherwise it could infl uence the draught! Insert the injector block with the hole on the front side pointing toward...
Page 17
Page 17 www.Jayline.Co.Nz november 2016 consumables some parts of your walltherm air® fi re are considered consumable. They are designed to be replaced as they will degrade over time. The life of the consumables will vary depending on; • how often the fi re is used • type of fuel. Some woods are much ...
Page 18
Page 18 www.Jayline.Co.Nz november 2016 walltherm air® – figs 9 1 upper combustion chamber 1a upper combustion chamber door with glass 2 injector block with secondary air feed 2b upper chamber grid 3 lower combustion chamber (gas combustion tunnel) 3a lower combustion chamber door with glass 3b lowe...
Page 19
Page 19 www.Jayline.Co.Nz november 2016 warnings below is a list of warnings to ensure effi cient and safe operation of your walltherm air® wood fi re: • warning: do not use flammable liquids or aerosols to start or rekindle the fire. • warning: do not use flammable liquids or aerosols in the vicinity...
Page 20
Page 20 www.Jayline.Co.Nz november 2016 walltherm air® warranty this is an important document – keep it in a safe place congratulations! We appreciate your decision to invest in our product. Your fi re will become an integral part of your lifestyle, heating your home during the colder months and at t...
Page 21
Page 21 www.Jayline.Co.Nz november 2016 jayline wood fire warranty 5 years (conditional) congratulations on the purchase of your jayline wood fi re. You must register your fi re by email or post within 30 days of installation to validate the guarantee (this registration card is in your install/opera...
Page 22
Page 22 www.Jayline.Co.Nz november 2016.