JAYLINE WALLTHERM AIR Installation & Operation Instructions - page 9
page 9
www.jayline.co.nz
NOVEMBER 2016
CORRECT OPERATION OF YOUR WALLTHERM AIR® WOOD FIRE
Simply by burning your Walltherm Air® fi re correctly, you can improve effi ciency, reduce fuel consumption
and minimise air pollution.
Starting A New Fire
Please note: If lighting the fi re for the fi rst time, dust fi re, glass, trim and fl ue before fi ring to avoid particles
sticking or discolouring. Once fi red, some smoke and vapour will be released as the VHT painted surfaces
enter the fi nal curing process. Open all windows and doors while running the fi re for up to 5 hours. People
with respiratory, heart or other relevant medical conditions should avoid inhaling vapours during the curing
process. All VHT paint will cure at the highest temperature achieved and will produce smoke again if this
temperature is exceeded.
To start and maintain a good fi re you will need the following items:
1. A packet of matches or lighter
2. A packet of fi relighters
3. A quantity of fi nely split, dry soft wood kindling about 300mm long and approximately
150g each (total approximately 1.5kg)
4. Seasoned fi rewood split into a range of starting sizes, from approximately 300g, 625g and
main loads of approximately 1.3kg each. All wood must be loaded front to back, except for
the kindling which must be layered on top of each other (not like a tepee).