JB Systems DynaSpot Operation Manual - page 3
ENGLISH
USER MANUAL
JB SYSTEMS
®
1/59
DYNASPOT
OPERATION MANUAL
Thank you for buying this JB Systems
®
product. To take full advantage of all possibilities and for your own
safety, please read these operating instructions very carefully before you start using this unit.
FEATURES
An extremely compact but very bright LED moving spot with 12° beam
Specially designed for DJs and smaller clubs.
Based on the very latest 10WATT LED technology from CREE!
Very low power consumption, only 37 W (money saving!)
0-100% dimming and different strobe effects
Separate gobo wheel with 6 fixed gobos + open
Separate color wheel with 8 colors
Excellent built-in programs for wonderful, ever changing, light shows.
IR-remote included for standalone and master/slave mode, no DMX-controller needed.
Multiple working modes:
DMX-control: via 5, 8 or 10 channels
Standalone: sound activated with internal mic
Master/slave: wonderful synchronized shows in standalone mode
DMX-master/slave: several units can work in audio synchronized master/slave, while the user only
needs 5 DMX-channels to keep full control over colors, gobos, strobe, dimming and pan/tilt speed.
Three different default settings, easy for rental companies:
PRO-defaults: basic settings for use on DMX-controllers.
AUTO-defaults: basic settings for easy master/slave use.
USER-defaults: save and recall your own preferred settings!
Easy software updates via special software upgrade unit
IEC mains in/outputs: easy daisy chaining of several units, up to 10A.
5V/350mA USB-output
4-digit LED-display for easy menu navigation
BEFORE USE
Before you start using this unit, please check if there’s no transportation damage. Should there be any, do
not use the device and consult your dealer first.
Important:
This device left our factory in perfect condition and well packaged. It is absolutely necessary
for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused
by mishandling is not subject to warranty. The dealer will not accept responsibility for any resulting defects
or problems caused by disregarding this user manual.
Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user
manual.
Check the contents:
Check that the carton contains the following items:
DYNASPOT unit
U-bracket with bolts (for Truss clamp)
IEC-power cable
Operating instructions