Jbc NANE-B Manual - page 3
www.jbctools.com
ø 0,1
ø 0,3
ø 0,6
0,7
3,5
0,2 x 0,1
4
5
For Nano
Soldering Iron
Replace the tip cleaning system:
- Brass wool
- Inox wool
- Metal brush
For Nano
Tweezers
Tool Holder assembly
Cable assembly
Changing the tip cleaning system
Changing cartridges
Save time and change cartridges safely without having to switch the station off.
All the cartridges shown are actual size. All measurements are in millimiters (mm).
Contact JBC if you need alternative shapes.
Compatible cartridges
The NANE-B station works with C105 cartridge range.
See the full range in
www.jbctools.com
and find the model that best suits your soldering needs.
Removing
Inserting
Aligning
Place the cartridge in the
slot as shown and pull the
handle to remove it.
Push the cartridge into the
handle to the mark*.
Use the holes to rotate
the cartridges for a proper
alignment.
*
Important
It is essential to insert the cartridges as far as the mark
for a proper connection.
Special models
Round
Chisel
Round bent
Bevel
Mark
1
2
2
1