Jbc NANE-B Manual - Sleep
www.jbctools.com
6
7
Operation
The JBC Exclusive Heating System
Our revolutionary technology is able to recover tip temperature extremely quickly. It means the user
can work at a lower temperature and improve the quality of soldering. Tip temperature is further
reduced thanks to the Sleep and Hibernation modes which increase tip life by 5.
1. Work
2. Sleep
Tools Menu:
· Set temperature limits
· Select temperature levels
· Set Sleep temperature
· Set Sleep delay
(from 0 to 9 min or no Sleep)
· Set Hibernation delay
(from 0 to 60 min or no
hibernation)
Tools Menu:
Tools Menu:
Tool in the stand
Actual Temp. 180ºC
Delay to hibernation: 29:30
Port
2
NT105
17:14
Sleep
2
17:14
Hibernation
Actual Temp. 25ºC
NT105
Port
2
350
ºC
Port
2
Power
45%
17:14
Selected 350ºC
NT105
USB flash drive is connected.
Station is controlled by a PC.
Station is controlled by a Robot.
Station software update.
Press INFO to start the process.
Warning.
Press INFO for failure description.
Error. Press INFO for failure description,
the type of error and how to proceed.
System notifications (Status Bar)
Menu Options
Station
Information
Power
indicator
Tool
connected
Work Screen
Status Bar
The NANE-B offers an
intuitive user interface
which provides
quick access
to station parameters.
Change
port
Displayed
when
temperature
levels are
activated
Station
Tools
Counters
Reset
Graphics
Press INFO for each parameter description.
3. Hibernation
When the tool is lifted from the
holder the tip will heat up to
the selected temperature.
When the tool is in the holder,
the temperature falls to
180ºC / 360ºF (preset sleep
temperature).
After longer periods of
inactivity (pre-set to 30 min.),
the power is cut off and the
tool cools down to room
temperature.
Long time in
the holder
350
ºC
Port
2
Power
45%
Temp. Levels
NT105
250
350
380
17:14