JBL VTX A12 Rigging Manual - page 15

VTX A12 

| Rigging Manual

15

7 - A12 RIGGING SYSTEM OVERVIEW

VTX A12 cabinets include a next generation rigging system that is easy to use, simple to understand and highly accurate. VTX A12 

enclosures are transported vertically on carts of four using the VTX A12 VT - Vertical Transporter cart system accessory. During 

transportation, all four cabinets travel collapsed and set to the 10-degree position. Cabinet-to-cabinet splay angle selection is done 

while the system is still on the ground, simply by moving the angle selection QRP (quick release pin) to the desired position. When 

speakers are lifted off the VTX A12 VT carts, an automatic angle-lock mechanism engages to secure the cabinets to the selected 

position. The cabinets maintain their splay positions until the user releases the angle-lock mechanism, at which point the cabinets 

can collapse again and be stored on the cart. 

7.1 - A12 RIGGING CLOSEUP 

FRONT CONNECTION POINT

REAR CONNECTION POINT

FRONT QRP

ANGLE SELECTION

REAR QRP

LOCK RELEASE BUTTON

ANGLE-LOCK MECHANISM