Jcb MC300 Safety And Operating Manual - 4. Sight Light

JCB, SO53 3LE

www.JCBDIY.com

Customer Helpline 0333 0143092  

be used to set the optimum 

oscillating frequency according 

to the accessories used and the 

respective application.

High oscillation frequency:

Sanding, sawing, rasping and 

polishing stone and metal.

Low oscillation frequency:

Scraping, polishing varnishes.

4. SIGHT LIGHT

The sight light allows you to keep 

a clear view under less illuminated 

circumstances. To turn on the light, 

simply press the on/off switch. 

When you release the on/off switch, 

the light will turned off.

5. ELECTRONIC 

FEEDBACK

Your tool is equipped with an 

internal electronic feedback system 

which helps to keep the preselected 

speed virtually constant between 

no-load and load conditions.

APPLICATION

WARNING: the saw teeth are very 

sharp. Do not touch during mounting 

and application.

The workpiece must be clamped 

tightly before it is cut.