Jcb TP305 Sitemaster 2 User manual - page 30
Important Product Information Guide
This Important Product Information Guide contains safety and handling for JCB Toughphone.
Look for recycling, disposal, and other environmental information in the JCB Toughphone User
Guide at:
http://www.jcbphone.co.uk/
To avoid injury, read all operating instructions and the following safety information before using
JCB Toughphone. For detailed operating instructions, read the JCB Toughphone User Guide on
your JCB Toughphone by visiting
http://www.jcbphone.co.uk/
Important Safety and Handling Information
WARNING: Failure to follow these safety instructions could result in fire, electric shock, or other
injury or damage to JCB Toughphone or other property.
General Useage : JCB Toughphone has been designed to be significantly more rugged than a
normal mobile phone, however it is NOT indestructible.
Carrying and Handling JCB Toughphone : JCB Toughphone contains sensitive components
Do not drop, disassemble, open, crush, bend, deform, puncture, shred, microwave, incinerate, paint,
or insert foreign objects into JCB Toughphone. Do not use JCB Toughphone if it has been
damaged—for example, if JCB Toughphone is cracked, punctured, or damaged by water.The
screens of JCB Toughphone are made of glass. This glass couldbreak if JCB Toughphone is
dropped on a hard surface or receives a substantial impact or is crushed, bent, or deformed. If the
glass chips or cracks, do not touch or attempt to remove the broken glass. Stop using JCB
Toughphone until the glass is replaced by a JCB Toughphone Authorized Service Provider. Glass
cracked due to misuse or abuse is not covered under the warranty.
Keeping the Outside of JCB Toughphone Clean Clean JCB Toughphone immediately if it comes
into contact with any contaminants that may cause stains, such as ink, dyes, makeup, dirt, food, oils,
and lotions. To clean JCB Toughphone, unplug all cables and turn off JCB Toughphone. Then use a
soft, slightly damp, lint-free cloth. Avoid getting moisture in openings. Don’t use window cleaners,
household cleaners, aerosol sprays, solvents, alcohol, ammonia, or abrasives to clean JCB
Toughphone. The front screen surfaces have an oleophobic coating. To remove fingerprints, simply
wipe these surfaces with a soft, lint-free cloth. The ability of this coating to repel oil will diminish
over time with normal usage, and rubbing the screen with an abrasive material will further diminish
its effect and may scratch the glass.
Dust and Water The JCB Toughphone in fully tested to meet either IP54 or IP57 specifications
(depending on the model). It is very important to note that all of the Toughphone connectors, covers
and battery compartment must be correctly fastened and have the correct 0-rings fitted to meet the