Jeanneau 57 Instruction Manual - page 65
Check the automatic breakers of the pumps and air-conditioning units are set
to ‘ON’ on the 230V panel # 2 in the cupboard behind the chart table seating.
Start the air conditioning unit in the desired area, select hot or cold and set the
temperature using its control.
Regularly clean the fi lters on the conditioned-air systems and sea water suc-
tion valves.
For the drainage, use and maintenance of the air conditioning system, please
refer to its instruction guide.
The boat may be fi tted with an optional heating system.
The two boilers are supplied by the fuel tank.
- Check the fuel valve is open (access on the tank in the aft cabin).
- Start each boiler then set the temperature using their controls.
For the use and maintenance of the heating system, please refer to its instruction
guide.
UTILITY ABOARD
5.12
HEATING SYSTEM
63
5