Jeanneau CAP CAMARAT 6.5 WA Owner's Manual - page 11
- 11 -
951840
Index B
1 TECHNICAL SPECIFICATIONS
1.1 CONSTRUCTION
Model .................................................................. CAP CAMARAT 6.5 WALK AROUND serie 2
Architect / Interior design ................................................... Jeanneau Design / Sarrazin Design
Builder .........................................................................................................................SPBI S.A
Principal means of propulsion ...........................................................................................Motor
Hull construction material ...................................... Single skin laminated fibreglass / Polyester
Deck construction material ....................... Laminated sandwich glass / Polyester / Balsa wood
Application ............................................................................................................. Wet laid fibre
1.2 GENERAL DIMENSIONS
L.O.A (L
max
)*....................................................................................................................6,59 m
(Including removable parts that can be dismantled (bow roller, pulpit, bowsprit), without affecting the
structure of the boat)
Hull length (L
h
)* ............................................................................................................... 6,06 m
(Excluding: removable parts that can be dismantled, without affecting the structure of the boat)
Overall width (B
max
)*........................................................................................................ 2,45 m
(Including: removable parts that can be dismantled, without affecting the structure of the boat)
Beam(B
h
)*........................................................................................................................2,45 m
(Excluding: removable parts that can be dismantled, without affecting the structure of the boat)
Air draught – Empty vessel.............................................................................................. 1,59 m
Draught - Boat fully laden ................................................................................................0,66 m
Wetted surface area .................................................................................. Approximately 10 m²
1.3 ENGINE
Nominal maximum propulsion power ..........................................................................147,2 Kw
Maximum recommended engine size .............................................................................. 284 kg
1.4 ELECTRICITY
Circuit type - Direct current .................................................................................................. 12V
1.5 CAPACITIES
Total mass of the liquid content of fixed tanks when they are full ................................... 178 kg
Fuel capacity ...................................................................................................................... 170 l
Fresh water capacity ............................................................................................................ 50 l
It may not be possible to use these capacities fully depending on the trim and load of the boat.
It is recommended to keep a reserve of 20% in the fuel tanks.
1
T
E
C
H
N
IC
A
L
S
P
E
C
IF
IC
A
T
IO
N
S