Jeanneau CAP CAMARAT 6.5 WA Owner's Manual - page 28
Manual is about: 2 Series
of
96
- 28 -
951840
Index B
Bilge pump maintenance
Please refer to the manufacturer's notes on the instructions for checking and maintaining the
bilge pumps.
- The drainage system is not designed to control water coming from breaches
in the hull.
- Keep the water level in the bilges to the minimum.
- Never store anything right at the bottom of the boat: Allow bilge water to flow
freely down to the lowest point of the boat.
SAFETY PRECAUTIONS
- Check that each bilge pump is working at regular intervals.
- Clear the bilge pump points or strainers of any debris that could clog them.
- If the watertight partitions which seal off the fore and aft points are fitted with valves they
must be closed at all times and only opened to drain water into the main bilge.