Jeanneau CAP CAMARAT 6.5 WA Owner's Manual - page 38
- 38 -
951840
Index B
7.2 DC INSTALLATION (12 V)
7.2.1 Battery use and distribution
General points
On board electrical power is direct current.
Battery charging is carried out either:
- by the alternator linked to the engine when the engine is running,
- by the battery charger (if the boat has one).
It is imperative that when the boat is first launched, a professional engineer connects the
batteries.
Always check the condition of the batteries and charge system before putting to sea.
Battery set
Maintenance
- Avoid charging batteries to a voltage greater than 14,6 V.
- Keep the batteries clean and dry.
- Regularly check that the terminals and connection cables are clean. If necessary, apply a
thin coating of paraffin on the terminals, to prevent corrosion.
- Regularly recharge all of the batteries onboard.
- Continuously maintain the charged batteries: this determines their length of life.
- Avoid long periods of electrical inactivity ( for example when wintering the boat).
Engine battery: 110A