Jeanneau MERRY FISHER 815 Owner's Manual - page 30
of
108
26/104
MANUAL BILGE PUMP
Location
Operation
Capacity: 40,5 litre / minute
WARNING
- The bilge pump system is not designed to provide buoyancy to the boat
in case of damage.
- The bilge pump system is designed to drive out the water being either
sea spray or leaks but absolutely not the water coming through a hole in
the hull, this hole being the result of a damage.
- Do not let the pumps run while dry, this may cause them damage.
- The water in the bilge shall be kept at its minimum.
- Check the functioning of each bilge pump regularly.