Jeanneau MERRY FISHER 815 Owner's Manual - page 64
60/104
WATER SYSTEM - DRAINAGE
OPERATION
Waste water from the sink, washbasins and heads is drained off by thru-hull fittings with
ball valves (the valve is closed when the valve handle is perpendicular to the hose, the
valve is open when the valve handle is in line with the hose).
All the floors have holes (limber holes) for the water flow.
A main sump located above the ballast receives water from the bilges.
The main sump is partially drained by an electric or a manual pump. Regularly dry the sump
with a sponge.
REF
Designation
C
Shower draining - Pump / Y
D
Shower draining - circa Pump
E
Sink draining - Y / Thru-hull fitting
F
Sink draining - Y
G
Washbasin draining - Thru-hull fitting
REF
Designation
15
Washbasin drain plug
18
Shower pump
19
Sink plug hole
THRU-HULL FITTING CLOSED
THRU-HULL FITTING OPEN
15
18
19
C
D
E
F
G